The 22" Factory Reproduction Conclusion

Blu Buy U · 03-12-2007, 11:10 PM

If you have not followed the whole thread but are interested,.. here is the summary of the FR wheels of what works & what doesn't. A special thanks to Tazz (Mark) for expiditing a new 01 cap to me at a great deal. First Impressions:22" Factory Reproductions

BBU

'02 H-D #677 · 03-13-2007, 05:56 AM

So give him a call back and educate him?

... if he/they want more business?! ...

Shadow Grey · 03-13-2007, 05:20 PM

what about the 02/03 center caps? they look a little different than the 00/01center caps pictured. Not 100% sure but they have more tabs than those in the pictures.

Blu Buy U · 03-13-2007, 05:33 PM

Quote:

Originally Posted by Shadow Grey

what about the 02/03 center caps? they look a little different than the 00/01center caps pictured. Not 100% sure but they have more tabs than those in the pictures.

Unless Ford changed the wheel design (which I doubt) between the 00-01 & 02-03 model years, they should work fine.

Shadow Grey · 03-13-2007, 10:17 PM

dug out my spares and compared it too the pics. The 00/01 and 02/03 are different. There are curved pieces between each clip and also three in the middle in a triangle formation. Just putting it out there in case they don't fit the FR's.

Blu Buy U · 03-13-2007, 10:21 PM

Quote:

Originally Posted by Shadow Grey

dug out my spares and compared it too the pics. The 00/01 and 02/03 are different. There are curved pieces between each clip and also three in the middle in a triangle formation. Just putting it out there in case they don't fit the FR's.

How about posting a pic of the back of the caps to show the differences?

TX Harley Guy · 03-13-2007, 10:29 PM

I think most of these wheels and caps are copies of the 00-01s. on my Detroit's their cap is identical to an 00-01 OEM cap from the back and its a perfect fit, my 03 caps were loose and didnt fit flush to the wheel, really close but not perfect.

Blu Buy U · 03-13-2007, 10:43 PM

Quote:

Originally Posted by TX Harley Guy

I think most of these wheels and caps are copies of the 00-01s. on my Detroit's their cap is identical to an 00-01 OEM cap from the back and its a perfect fit, my 03 caps were loose and didnt fit flush to the wheel, really close but not perfect.

Tx, so what are you running with your reps? Oops! Saw you earlier post. 00-01 cap,... right? When I get your 03 cap I'll check it out on the FR's & see what's up,... thanks.

Tazz · 03-13-2007, 11:33 PM

Im lost?
On a stock OEM wheel from 00-03 both OEM wheel caps no matter what the year wheel cap 00-01 or 02-03 are interchangeable even though the caps have a bit a a different design.
On a Reproduction wheel both caps Should fit as long as the caps the Reproduction wheels are of the same 2 designs as the OEM wheel caps. If wheel caps that come with the Repo wheels are the same as a OEM wheel cap and does not fit then the repo wheel doesn't have the same lip/ridge as the Stock OEM wheel.
FYI
The Stock 00-01 center caps do fit a bit more snug that the stock 02-03 wheel caps but never had wheels caps from either my 01 or 03 HD fly off and I've been 125mph in my 01 HD and 145mph in my 03HD. So it still comes down to the lip/ridge on the repo wheels as to wheather the both style of caps will fit properly.
Tazz

Blu Buy U · 03-13-2007, 11:44 PM

Quote:

Originally Posted by Tazz

Im lost?
On a stock OEM wheel from 00-03 both OEM wheel caps no matter what the year wheel cap 00-01 or 02-03 are interchangeable even though the caps have a bit a a different design.
On a Reproduction wheel both caps Should fit as long as the caps the Reproduction wheels are of the same 2 designs as the OEM wheel caps. If wheel caps that come with the Repo wheels are the same as a OEM wheel cap and does not fit then the repo wheel doesn't have the same lip/ridge as the Stock OEM wheel.
Tazz

I'm a bit confused too Mark. Here is link to Big Bill @ Spray It Racing. http://www.nhtoc.com/vbforum/showthr...-03+Centercaps
He was offering 02-03 Caps & has front & back Pic's. Those little Half moons would have to be removed (I think) to fit my wheels. But otherwise I think they would work fine. I'll just have to get a Tx Harley Guys Cap & try it.

Tazz · 03-13-2007, 11:55 PM

My guess is the half moons on the 02-03 caps is to position the cap as to keep the faux bolts in the same position on the wheel. That is the faux bolt directly above the Bar & shield is always in the center of a spoke of the wheel. Just a guess though.
Tazz

TX Harley Guy · 03-14-2007, 07:48 AM

Quote:

Originally Posted by Blu Buy U

Tx, so what are you running with your reps? Oops! Saw you earlier post. 00-01 cap,... right? When I get your 03 cap I'll check it out on the FR's & see what's up,... thanks.

Im useing the 00-01 caps. I didnt try to cut any of the half moons off of the 03 cap I tried, maybe I should.

Blu Buy U · 03-14-2007, 08:10 AM

Quote:

Originally Posted by Tazz

My guess is the half moons on the 02-03 caps is to position the cap as to keep the faux bolts in the same position on the wheel. That is the faux bolt directly above the Bar & shield is always in the center of a spoke of the wheel. Just a guess though.
Tazz

I think you are right on. It's funny how a manufacture could pay attention to so much detail like (hub cap orientation) & yet design a 4 thread head.

Blu Buy U · 03-15-2007, 12:53 AM

OK, my finial post on this subject. 00-01 & 02-03 Centercaps will fit the Factory reproduction Wheels Period. The 02-03 Center caps require cutting the alignment / orientation tabs off,.. a simple 5 minute process with a Dremel tool with a cutoff wheel.
The pic's below explain it all. I wish I had all this information from the start on the Factory Reproduction wheels. I hope this post will help answer questions for others considering buying same.

Blu Buy U · 03-15-2007, 01:02 AM

A special thanks to Tazz (Mark) & TxHarleyGuy (John) for supplying me with the centercaps at little or no cost so I could do this trial fitting without costing an arm & a leg. Mark & John are standup gentlemen! Thanks again guys!

03-12-2007, 11:10 PM	#1 (permalink)
Blu Buy U Registered User Join Date: Aug 2003 Location: Nor Cal Posts: 1,308 View this user's gallery iTrader: 0 / 0%	The 22" Factory Reproduction Conclusion If you have not followed the whole thread but are interested,.. here is the summary of the FR wheels of what works & what doesn't. A special thanks to Tazz (Mark) for expiditing a new 01 cap to me at a great deal. First Impressions:22" Factory Reproductions BBU Last edited by Blu Buy U; 03-12-2007 at 11:16 PM..

03-13-2007, 11:33 PM	#9 (permalink)
Tazz Registered User Join Date: Feb 2003 Location: KS Posts: 3,973 View this user's gallery iTrader: 0 / 0%	Im lost? On a stock OEM wheel from 00-03 both OEM wheel caps no matter what the year wheel cap 00-01 or 02-03 are interchangeable even though the caps have a bit a a different design. On a Reproduction wheel both caps Should fit as long as the caps the Reproduction wheels are of the same 2 designs as the OEM wheel caps. If wheel caps that come with the Repo wheels are the same as a OEM wheel cap and does not fit then the repo wheel doesn't have the same lip/ridge as the Stock OEM wheel. FYI The Stock 00-01 center caps do fit a bit more snug that the stock 02-03 wheel caps but never had wheels caps from either my 01 or 03 HD fly off and I've been 125mph in my 01 HD and 145mph in my 03HD. So it still comes down to the lip/ridge on the repo wheels as to wheather the both style of caps will fit properly. Tazz Last edited by Tazz; 03-13-2007 at 11:45 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Home \| Classified Ads \| Gallery \| < \| Register on the Forum \| Merchandise \| Supporting Vendors \| Chat

03-13-2007, 05:56 AM	#2 (permalink)
'02 H-D #677 Charter Member Paid Member Join Date: Feb 2003 Location: Seattle Posts: 6,922 NHTOC member #: 25 View this user's gallery iTrader: 0 / 0%	So give him a call back and educate him? ... if he/they want more business?! ...

03-13-2007, 05:20 PM	#3 (permalink)
Shadow Grey Work In Progress Join Date: Mar 2006 Location: San Diego, Ca Posts: 1,123 View this user's gallery iTrader: 0 / 0%	what about the 02/03 center caps? they look a little different than the 00/01center caps pictured. Not 100% sure but they have more tabs than those in the pictures.

03-13-2007, 10:17 PM	#5 (permalink)
Shadow Grey Work In Progress Join Date: Mar 2006 Location: San Diego, Ca Posts: 1,123 View this user's gallery iTrader: 0 / 0%	dug out my spares and compared it too the pics. The 00/01 and 02/03 are different. There are curved pieces between each clip and also three in the middle in a triangle formation. Just putting it out there in case they don't fit the FR's.

03-13-2007, 10:29 PM	#7 (permalink)
TX Harley Guy The Banana King! Join Date: May 2003 Location: Dallas, O.C. Posts: 4,339 View this user's gallery iTrader: 0 / 0%	I think most of these wheels and caps are copies of the 00-01s. on my Detroit's their cap is identical to an 00-01 OEM cap from the back and its a perfect fit, my 03 caps were loose and didnt fit flush to the wheel, really close but not perfect.

03-13-2007, 11:55 PM	#11 (permalink)
Tazz Registered User Join Date: Feb 2003 Location: KS Posts: 3,973 View this user's gallery iTrader: 0 / 0%	My guess is the half moons on the 02-03 caps is to position the cap as to keep the faux bolts in the same position on the wheel. That is the faux bolt directly above the Bar & shield is always in the center of a spoke of the wheel. Just a guess though. Tazz

03-15-2007, 01:02 AM	#15 (permalink)
Blu Buy U Registered User Join Date: Aug 2003 Location: Nor Cal Posts: 1,308 View this user's gallery iTrader: 0 / 0%	A special thanks to Tazz (Mark) & TxHarleyGuy (John) for supplying me with the centercaps at little or no cost so I could do this trial fitting without costing an arm & a leg. Mark & John are standup gentlemen! Thanks again guys!