Quote:
Originally posted by Harley#356
tried to adjust mine today on my N/A 5.4.....i dont know if it was my multimeter that was fuggered up, but i was getting like 1.27 volts with the thing rotated all the way down....then 1.38 rotated all the way up  i couldnt get it down to .999
gonna try to borrow a buddies multi meter and try again. its a real PITA on the N/A motor to get to it. gotta yank the TB cover off, take the intake off, take some PVC tubes off, take another little thing off with 2 little PITA nuts, then can finally get to it 
|
May not be buggered up. My expy has the exact same motor and mine was low at .82.
Doing to much work man! Took me 5 min to do the expy (no TB Cover) and 5 miinutes to do 2cool's 01 with a cover over the TB.
Right angle Philips is your friend! All ya got to do is take the cover off and use that bad boy to lossen the lower screw a little and then the top a little. If you cant get the adjustment you need then you can always hog out the upper hole a little bit to give you the extra adjustment that you need.
If you need to call me for some pointers just give me a ring anytime man. Let me know and I will pm you my number.
Stew