National Harley Truck Owners Club - View Single Post

Crockett59 · 05-26-2003, 07:58 PM

Okay guys,

As you have probally seen Ken800 and I were both experimenting with the air intake temps to see what was better.
JLP Ram air or Modded STOCK box

I was fooling around today and decided to do some more tests. I have tested some different setups all last week. Here is what I got, Stock air box, K&N filter, 2 1/2" Vacuum hose ram air.

I tested this for about 15 minutes or so, I took it down the street and rode for about 5-7 miles, most of the time staying between 40-50 mph. Had 2 red lights that lasted about 6 minutes. The temp outside was 61 degrees and the air intake temp NEVER was higher than 64 degeres. The setup today was DUAL tubes coming into one mounted under the intercooler, and the air box boot conected to the fender. The engine temp was 180-185 degrees. I'll post some more results in a few days, I just wanted to post this before I forgot.

05-26-2003, 07:58 PM	#1 (permalink)
Crockett59 Indestructible! Join Date: Feb 2003 Location: Dela-Where? Posts: 1,760 View this user's gallery iTrader: 0 / 0%	Air intake temps Okay guys, As you have probally seen Ken800 and I were both experimenting with the air intake temps to see what was better. JLP Ram air or Modded STOCK box I was fooling around today and decided to do some more tests. I have tested some different setups all last week. Here is what I got, Stock air box, K&N filter, 2 1/2" Vacuum hose ram air. I tested this for about 15 minutes or so, I took it down the street and rode for about 5-7 miles, most of the time staying between 40-50 mph. Had 2 red lights that lasted about 6 minutes. The temp outside was 61 degrees and the air intake temp NEVER was higher than 64 degeres. The setup today was DUAL tubes coming into one mounted under the intercooler, and the air box boot conected to the fender. The engine temp was 180-185 degrees. I'll post some more results in a few days, I just wanted to post this before I forgot. __________________ Proud owner of a 2002 Harley Davidson F150 Mods: Kenne Bell 2.3L, Chickenears Ram Air Intake, JLP intake plenum, Weapon X Coils, Bassani High Flow cats, Magnaflow muffler, Troyer Performance E-fan, 4lb lower, FTVB, SCT chip, HID's, Accufab TB, REM Carbon Fiber intake tube, High Flow Water Pump, LFP Heat exchanger, .....theres a bunch more but I honestly can't remember it all!