![]() |
![]() |
|
|
Home |
Classified Ads |
Gallery |
Join the Club |
Register on the Forum |
Merchandise |
Supporting Vendors |
Chat | ||
|
|
#48 (permalink) |
|
ResFirma Mitescere Nescit
Paid Member
|
02/03 Heater Core Hoses
Motorcraft part# KH-281 or F65Z-18472-BBB. This one goes to the closest to the firewall in the corner. Part# KH-201 OR XL3Z-18472-AB, is closer to the front or the one with the restrictor in the hose. __________________ |
|
|
|
|
|
#49 (permalink) |
|
ResFirma Mitescere Nescit
Paid Member
|
Here is everything you wanted to know about blower bolts / washers:
Blower snout to bearing plate: M8X45X1.25 GW PN: 10778 Qty 8 M8 Flat Washer GW PN: 23989 Qty 8 Plenum to Supercharger case: M6X80X1.0 GW PN: 10751 Qty 1 Plenum to Supercharger case: M6X35X1.0 GW PN: 10742 Qty 5 M6 Flat Washer GW PN: 23987 Qty 6 |
|
|
|
|
|
#51 (permalink) |
|
Guest
|
Part numbers for the Heater hoses that run from the Heater core to the engine block are, Motorcraft part#
KH-281 or F65Z-18472-BBB. This one goes to the closest to the firewall in the corner. Part# KH-201 OR XL3Z-18472-AB, is closer to the front or the one with the restrictor in the hose. |
|
|
|
|
|
#60 (permalink) |
|
Worlds Fastest HD F150!!!
Paid Member
|
i'd check the amperage on that relay before swapping out to it. Chris said napa wasnt sure on the rating, but if its another 20 amp relay like the old LFP ones, it'll last for a while but eventually still fry
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|