Ported my own blower

lenny2001harley · 02-22-2010, 12:02 AM

ported my eaton.did similar as steig does and filled the silencer holes.
this was a messy job.lots of aluminum shavings .good thing i did it at work.all in all it was worth doing it myself.took me around four hours.im happy with results.

DATS TTRAH! · 02-22-2010, 01:37 AM

nice! you surely dont have to worry about that jb weld going anywhere. Great job bro

Harley#356 · 02-22-2010, 07:31 AM

looks pretty good. Just check with the rotors in the case to check that you didn't gut the outlet a little too far on that outer hole you added, looks a little on the wide side, and you don't want the opening past the compression outlet of the rotors or boosted air is going to be pushed back up into the rotors on the outer edges.

Hoffmann · 03-02-2010, 01:09 PM

Looks great Lenny!

02-22-2010, 01:37 AM	#2 (permalink)
DATS TTRAH! PiMpInDaSoUtH! Join Date: Sep 2008 Location: laffy, louisiana Posts: 1,719 View this user's gallery iTrader: 0 / 0%	nice! you surely dont have to worry about that jb weld going anywhere. Great job bro __________________ , 2009 seadoo RXP-X riva waterbox with rude rear exhaust outlet, Rude upgraded bigger supercharger, riva sponsons, fuel pressure regulatoR, RIVA pro blocks, riva rear air, solas prop, custom riva racing ECM, intercooler upgrade, intercooler relocation bracket,60lb injectors

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Home \| Classified Ads \| Gallery \| < \| Register on the Forum \| Merchandise \| Supporting Vendors \| Chat

02-22-2010, 07:31 AM	#3 (permalink)
Harley#356 Worlds Fastest HD F150!!! Join Date: Jan 2003 Location: Week-Philly; Weekend-Souf Jerz Posts: 31,622 View this user's gallery iTrader: 0 / 0%	looks pretty good. Just check with the rotors in the case to check that you didn't gut the outlet a little too far on that outer hole you added, looks a little on the wide side, and you don't want the opening past the compression outlet of the rotors or boosted air is going to be pushed back up into the rotors on the outer edges.

03-02-2010, 01:09 PM	#4 (permalink)
Hoffmann "Shadow the Hedgehog" Join Date: Jun 2004 Location: Jacksonville - FL Posts: 6,979 View this user's gallery iTrader: 0 / 0%	Looks great Lenny!