HOW TO install hid for foglights

DATS TTRAH! · 09-28-2008, 12:33 PM

i was about to install my hid conversion for my foglight on my 2003 HD and i heard you cannot do it using fords h1 setup. Can someone give me some direct pointers on how to go by doing this because i want it done to the point that i wont have to worry about it every time it raINS. I DID HEAR ABOUT THIS IN OTHER SECTIONS, BUT BI thought you guys were referring to the f250.

Harley#356 · 09-28-2008, 07:39 PM

Isn't this your 3rd or 4th thread on the H1 foglights and HID's? The info has been posted up quite a few times

JGsSpcNightRod7 · 07-21-2010, 01:08 PM

Hey guys/Girls, I have changed a lot of belts in my time, but this one got me. The serpentine belt for the Alternator, is behind the SC belt. I did the normal 1/2" drive in the tenser, starting taking off the belt while the fan and everything else was cutting the

out of me. Then starting taking the belt off the pulleys and then

a bracket between the crank balancer and the SC crank balancer... I have never seen this before, so I put everything back together, but I really need to change this belt. (which has oops 147K miles on it, no cracking but I am pushing my luck). I guess I have to take the SC serpentine belt off and then take the Alternator belt off (at-least off the pulleys) then loosen the two nuts and one bolt for that bracket? Help me out on this one please, let me know if my logic is going in the right direction.

Thanks
Johnny

PS, i did do a search on this in HNTOC, but came up short. Most threads dealt with the SC belt and changing out pulleys.

JGsSpcNightRod7 · 07-21-2010, 01:09 PM

Sorry did not mean to post here

harleyhank · 07-21-2010, 02:29 PM

Hey DATS, don't forget about the covers for your fogs ...XPEL tech. Corp. 1-8004479928 these will protect your fogs.You can order only fog cover.BE sure to follow directions to the "T" don't touch back side when you go to apply covers,they work great..........

09-28-2008, 12:33 PM	#1 (permalink)
DATS TTRAH! PiMpInDaSoUtH! Join Date: Sep 2008 Location: laffy, louisiana Posts: 1,719 View this user's gallery iTrader: 0 / 0%	HOW TO install hid for foglights i was about to install my hid conversion for my foglight on my 2003 HD and i heard you cannot do it using fords h1 setup. Can someone give me some direct pointers on how to go by doing this because i want it done to the point that i wont have to worry about it every time it raINS. I DID HEAR ABOUT THIS IN OTHER SECTIONS, BUT BI thought you guys were referring to the f250.

07-21-2010, 01:08 PM	#3 (permalink)
JGsSpcNightRod7 JGsSpcNightRod7and2002HDF Join Date: Jul 2010 Location: Cary, N.C. Posts: 6 View this user's gallery iTrader: 0 / 0%	How do I replace the Serpentine belt for AC--no the belt for the supercharger Hey guys/Girls, I have changed a lot of belts in my time, but this one got me. The serpentine belt for the Alternator, is behind the SC belt. I did the normal 1/2" drive in the tenser, starting taking off the belt while the fan and everything else was cutting the out of me. Then starting taking the belt off the pulleys and then a bracket between the crank balancer and the SC crank balancer... I have never seen this before, so I put everything back together, but I really need to change this belt. (which has oops 147K miles on it, no cracking but I am pushing my luck). I guess I have to take the SC serpentine belt off and then take the Alternator belt off (at-least off the pulleys) then loosen the two nuts and one bolt for that bracket? Help me out on this one please, let me know if my logic is going in the right direction. Thanks Johnny PS, i did do a search on this in HNTOC, but came up short. Most threads dealt with the SC belt and changing out pulleys.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Home \| Classified Ads \| Gallery \| < \| Register on the Forum \| Merchandise \| Supporting Vendors \| Chat

09-28-2008, 07:39 PM	#2 (permalink)
Harley#356 Worlds Fastest HD F150!!! Join Date: Jan 2003 Location: Week-Philly; Weekend-Souf Jerz Posts: 31,622 View this user's gallery iTrader: 0 / 0%	Isn't this your 3rd or 4th thread on the H1 foglights and HID's? The info has been posted up quite a few times

07-21-2010, 01:09 PM	#4 (permalink)
JGsSpcNightRod7 JGsSpcNightRod7and2002HDF Join Date: Jul 2010 Location: Cary, N.C. Posts: 6 View this user's gallery iTrader: 0 / 0%	Sorry did not mean to post here

07-21-2010, 02:29 PM	#5 (permalink)
harleyhank Registered User Paid Member Join Date: Jul 2008 Location: Benton Ar. Posts: 1,132 NHTOC member #: 592 View this user's gallery iTrader: 0 / 0%	Hey DATS, don't forget about the covers for your fogs ...XPEL tech. Corp. 1-8004479928 these will protect your fogs.You can order only fog cover.BE sure to follow directions to the "T" don't touch back side when you go to apply covers,they work great..........