No problem
Rob W
No problem
Rob W
That's not quite the formula I use. The actual formula to convert from mm to inches is "width/25.4" and is slightly more accurate than just multiplying by .04, thus using Robs figures I would derive this answer instead:
275/25.4 = 10.83 X .45 = 4.87 X 2 = 9.74 + 20 (wheel diam) = 29.74
or
(275 / 25.4) x .45 x 2 + 20 = 29.74
or this to convert any metric size to diameter in inches:
(width in mm x 25.4) x (aspect ratio) x (2) + (wheel diameter) = overall tire diameter.
Keep in mind that these formula results are APPROXIMATIONS only since tire diameters vary slightly between all manufacturers.
fyi - you can find lots of different tire calculators on the net.
they allow you to type in every possible size combo, then calculate that against stock, or another tire sizing. When i get home, ill post the one i use... even tells how your speedo will be effected.
Suds... you're right... the calculations will give you the ball park... Also if you REALLy wanna get technical.. you have to factor for almost 15% loading change too.
Rob W
HERE IS THE CONVERSION / FORMULA FOR THE SIZE:Originally posted by 2002GreyHD150
no problem..... the equation is easy....
take the size (275, 295,305 etc) X .04 to convert to inches... then X the aspect ratio (.40 , .45 , .50) X 2 + wheel diam =overall tire diameter unloaded.... example:
275/45/20:
275 X .04 = 11 X .45 =4.95 X 2 = 9.9 + 20 (wheel diam) = 29.9
the X2 messes with most people.. this is the amount of tire above & below the rim... thus there is (2) parts..
Rob W
275/45/20:
275 MM: (25 MM PER 1 INCH) 275 DIVIDED BY 25=11"
45 (% OF THE 275) = SIDE WALL "PROFILE"
AND OBVIOUSLY: 20= " OF THE RIM
2003 HARLEY DAVIDSON F-150 #2888 (Black) of 10,047. Born on 1/23/03.
Formerly "100th#2888"
Dual Magnaflows w/ X, HID headlights, LED rear, L 3rd, Line of Fire, Roush fogs, Eibach 1" front drop, 2" Bell Tech rear drop, "L" spec Bilsteins at all 4, Ported and Polished throttle body, Custom polished stock upper, Volant intake, METCO Idler pulleys, Innovations ProSport. TRADED IN ON 6/3/08. Fun while the ride lasted. U.S. NAVY SEABEES RETIRED.
same formula stated a different way
Rob W
WHOA! Reflexxions Hood to my door including tax $425!!!
Street Scene roll pan: $175.
SS hitch shipped: $130
Custom paint mask/stencil: $40
Airbrush/Pinstripe quote: $250
YES!!! I am UNDER BUDGET!!!!!
Suspense: PRICELESS!!!
LOL
Rob W
This thread is CRUEL! without pictures...reminds me of another TEASE (that would be you, KRIX)
hehehhehe
I got another mod today and it should be here by the end of the week, and I am following in Krix's footsteps.......
no pics until it is here
LOL Krom you READ my mind... I am pushing back... I will likely be done before Krix... but its all cool....
I am SOOO stoked... I can't belive my wife is letting me do ALL of this at once... SHE ROCKS!!!
Pregnant Queen!!
ROb W
wow just noticed 3700 posts.. dang I need a real job.. LOL
Rob W
who did you get your reflexions hood through and what style? That is a good price for shipped.
the regular Dominator 701700... not the one with the Cobra Nostrils...
My local SPeed shop via Arrow Speed Warehouse... had it in KC, Mo... they don't charge freight to deliver from KC to St. Louis & they spotted me the tax for a good deal.... I am thrilled... even with tax it would have only been about $450-475 so about the same as $399 + 75 freight & would have had to drive to the freight terminal... this way if the hood is "geeked up" all & ahve to do is say "try again"
ROb W