Page 1 of 12 1 2 3 11 ... LastLast
Results 1 to 15 of 172

Thread: TCE *BIG* Brake kit is out!!!

  1. 06-11-2005, 09:08 AM #1
    airtroop01
    airtroop01 is offline
    Back to a KB
    Name:

    airtroop01's Avatar
    Join Date
    Dec 2003
    Location
    Livermore, CA
    Posts
    1,858
    Like
    0
    Liked 0 Times in 0 Posts

    TCE *BIG* Brake kit is out!!!

    Check this out!

    TCE's Plus II package comes with: Wilwood TC 6 calipers, 15”, gas slotted and zinc plated rotors on Billet aluminum hats, new hubs and bearings, pads, hoses, radial mounting brackets and all the necessary hardware to handle the installation.

    "As a result of the new TC 6 caliper use we also have a bit more spoke clearance than found on our current kit. The benefit being about .25” more room! This is accomplished by the narrow body design of the TC 6 as well as a slight reduction in pad thickness netting a bit more room. Life of the new pad should not be affected however as the Stage II pad is nearly two times the square inches of the current BSL4 pad! "




    I'm drooling already!
    The additional spoke clearance means those of you with custom wheels should find it easier to clear now!
    2002 Black Harley-Davidson F150
    2.6 KB, DMP Built Motor, Dynatech LT's
    Reply With Quote Reply With Quote
  2. 06-11-2005, 09:26 AM #2
    03HD8338
    03HD8338 is offline
    Capo Regime
    Name:

    03HD8338's Avatar
    Join Date
    Sep 2003
    Location
    Tallahassee, FL
    Posts
    754
    Like
    0
    Liked 2 Times in 2 Posts
    Send a message via AIM to 03HD8338
    How much??? and from where?
    Reply With Quote Reply With Quote
  3. 06-11-2005, 09:39 AM #3
    HD-EGull 1
    HD-EGull 1 is offline
    Registered User
    Name:

    HD-EGull 1's Avatar
    Join Date
    Sep 2003
    Location
    SHOW ME STATE .....MO.
    Posts
    2,387
    Like
    1
    Liked 1 Time in 1 Post
    TCE's Plus II package comes with: Wilwood TC 6 calipers, 15”, gas slotted and zinc plated rotors on Billet aluminum hats, new hubs and bearings, pads, hoses, radial mounting brackets and all the necessary hardware to handle the installation.
    .................................................. .................................................. .....

    so tell me how well will these rotor hold up to the city driving & and the heat of stop & go in the city

    mike g
    BLESSED / 03 2TONE
    Reply With Quote Reply With Quote
  4. 06-11-2005, 10:31 AM #4
    Dbl G
    Dbl G is offline
    Registered User
    Name:

    Dbl G's Avatar
    Join Date
    May 2004
    Posts
    13,758
    Like
    0
    Liked 0 Times in 0 Posts
    IN MEMORY OF
    Blake (Fuzion) Finnel 12-3-1986 - 08-11-2007
    NHTOC #120
    Reply With Quote Reply With Quote
  5. 06-11-2005, 10:41 AM #5
    Speedin Bob
    Speedin Bob is offline
    Yeah... I drive fast.
    Name:

    Speedin Bob's Avatar
    Join Date
    Oct 2003
    Location
    Indianapolis, IN
    Posts
    1,965
    Like
    0
    Liked 0 Times in 0 Posts
    YUM!!

    Reply With Quote Reply With Quote
  6. 06-11-2005, 10:42 AM #6
    Ayrton
    Ayrton is offline
    Senior Member
    Name: Chris

    Ayrton's Avatar
    Join Date
    Jan 2003
    Location
    Atlanta, Georgia
    Posts
    3,826
    Like
    0
    Liked 0 Times in 0 Posts
    Originally posted by HD-EGull 1

    so tell me how well will these rotor hold up to the city driving & and the heat of stop & go in the city

    mike g
    A 15"x1.5" rotor can handle more than anything one of our trucks can dish out.
    Reply With Quote Reply With Quote
  7. 06-11-2005, 10:53 AM #7
    Ryan@RhynoTune
    Ryan@RhynoTune is offline
    Drivetrain Calibration
    Name:

    Ryan@RhynoTune's Avatar
    Join Date
    Feb 2004
    Posts
    1,431
    Like
    0
    Liked 0 Times in 0 Posts
    Send a message via AIM to Ryan@RhynoTune
    Originally posted by 03HD8338
    How much??? and from where?
    2002 HD - 631 RWHP - 757 RWTQ
    Currently fabbing twin-turbos
    Reply With Quote Reply With Quote
  8. 06-11-2005, 10:56 AM #8
    bgstew6
    bgstew6 is offline
    ResFirma Mitescere Nescit
    Name: stew

    bgstew6's Avatar
    Join Date
    Jun 2004
    Location
    Charleston, SC
    Posts
    18,059
    Like
    0
    Liked 0 Times in 0 Posts
    Send a message via AIM to bgstew6
    yeah what he said????/ Inquiring minds want to know
    Reply With Quote Reply With Quote
  9. 06-11-2005, 11:06 AM #9
    Speedin Bob
    Speedin Bob is offline
    Yeah... I drive fast.
    Name:

    Speedin Bob's Avatar
    Join Date
    Oct 2003
    Location
    Indianapolis, IN
    Posts
    1,965
    Like
    0
    Liked 0 Times in 0 Posts
    http://www.tceperformanceproducts.com

    Reply With Quote Reply With Quote
  10. 06-11-2005, 11:26 AM #10
    HD-EGull 1
    HD-EGull 1 is offline
    Registered User
    Name:

    HD-EGull 1's Avatar
    Join Date
    Sep 2003
    Location
    SHOW ME STATE .....MO.
    Posts
    2,387
    Like
    1
    Liked 1 Time in 1 Post
    thanks.... Speedin Bob & ayrton
    nice big pic,,,,,,, looking real nice
    Last edited by HD-EGull 1; 06-11-2005 at 11:30 AM.
    Reply With Quote Reply With Quote
  11. 06-11-2005, 11:44 AM #11
    Krix330cic(NJ)
    Krix330cic(NJ) is offline
    FEATURED
    Name:

    Krix330cic(NJ)'s Avatar
    Join Date
    Feb 2003
    Location
    South Jersey
    Posts
    5,321
    Like
    0
    Liked 0 Times in 0 Posts
    about 3g's..
    Reply With Quote Reply With Quote
  12. 06-11-2005, 12:11 PM #12
    Ayrton
    Ayrton is offline
    Senior Member
    Name: Chris

    Ayrton's Avatar
    Join Date
    Jan 2003
    Location
    Atlanta, Georgia
    Posts
    3,826
    Like
    0
    Liked 0 Times in 0 Posts
    So what’s the bottom line? Of course the cost of this kit is proving to be much higher than that of the current kit. Caliper cost alone is better than double that of the BSL4. Target price of the Stage II kit is $3079. Options such as colored calipers and drilled rotors carry a premium as well. The added cost of this kit is reflected in the caliper, pads, rotors and the need for custom radial mount brackets- one of the most costly parts to produce in such a kit.
    That is a better value than comparable kits from Brembo or SSBC.
    Reply With Quote Reply With Quote
  13. 06-11-2005, 02:19 PM #13
    teknics
    teknics is offline
    Registered User
    Name:

    teknics's Avatar
    Join Date
    Feb 2003
    Location
    Long Island, NY
    Posts
    810
    Like
    0
    Liked 0 Times in 0 Posts
    Send a message via AIM to teknics Send a message via Yahoo to teknics
    Hmmm...

    I hate you guys sometimes. lol
    Reply With Quote Reply With Quote
  14. 06-11-2005, 03:13 PM #14
    Smoak
    Smoak is offline
    Registered User
    Name:

    Smoak's Avatar
    Join Date
    Oct 2004
    Location
    FL
    Posts
    585
    Like
    0
    Liked 0 Times in 0 Posts
    Send a message via AIM to Smoak
    wow, that is a nice kit!
    Reply With Quote Reply With Quote
  15. 06-11-2005, 03:15 PM #15
    2002GreyHD150
    2002GreyHD150 is offline
    Registered User
    Name:

    Join Date
    Feb 2003
    Location
    DFW, Texas
    Posts
    6,995
    Like
    0
    Liked 0 Times in 0 Posts
    as long as the rotor is not drilled it will give very long life. The slotted & dimpled surfaces are a nice little cosmetic & slight performance advantage on the street or spirited off ramp escapades. They really help in wet weather.

    nice kit.... $3K is not bad for what you are getting.

    Rob W
    Reply With Quote Reply With Quote
Page 1 of 12 1 2 3 11 ... LastLast
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules