Originally posted by bgstew6
Just FYI,
If you have a predator then you dont need pins or any special connector or volt meter.
Just plug predator in,
TUrn key to on but dont start it
Select Diagnostics
The scroll down and select Gas Trans or Gas Speed (cant remember)
then selelct Choose From List
Scroll down and select TP V
Then select Fast Rate
Then Select NO for Datalog
You will then see the TP V
You have enough cable on the predator to make it out of the CAB and into the Engine Bay so that you can look at it and adjust the TPS to .99.
On my Predator I didn't see anything that said "TP V" are their different Predators out there? Also I had other prompts that aren't mentioned above.
Sean E.
'02 DSG HD ( Gone but will always have a special place in my heart...)