Where is the best place to drill/run-cable into the cabin? I need a couple of "0" (zero gauge) and a few (three) other ancillary hot leads to come in from the batteries. Hence, a pretty big hole!
Where is the best place to drill/run-cable into the cabin? I need a couple of "0" (zero gauge) and a few (three) other ancillary hot leads to come in from the batteries. Hence, a pretty big hole!
aka LeeRandall - NHTOC #25
BIG hole on the driver side, above the pedals... or there are a number of biggie size holes on the passenger side, under dash and under the floor carpet, if you pull it up some. Will just have to remove the rubber plug(s).
You can go straight back from the battery, to just under where all the wires goe into the PCM.. there is a big hole that you can feed the wires into the cab..
Check your email, ill send you a semi good pic.
Thanks! I already got the one on the driver's side above the pedals (to the way upper left kick panel) all filled/clogged up with existing stuff.