Ok, I'll see what I can do. I may take me a bit. I'd also like to hear Stew's report on the install & handling.
Thanks Garrett,
Paul
Ok, I'll see what I can do. I may take me a bit. I'd also like to hear Stew's report on the install & handling.
Thanks Garrett,
Paul
G have a mag-hytec cover on its way. Should be here mid week.
The Mag cover has a built in o-ring style seal.
whatI can do is trace the outline fo the mounting flange on a piece of medium thickness poster board. then use some scribe/calipers & measure the lip for you...
got a fax machine? PM me some digits. I will fax you a to scale drawing.
Rob W
That would be awesome Rob!
I was contemplating how I could do an accurate pattern with the cover on the truck,... it would have been tuff to do to say the least
Thanks,
Paul
Last edited by Blu Buy U; 12-11-2005 at 01:17 PM.
Rob, that would be great,,,,,However I scan and e-mail everything. After loosing two faxes in one year two lightning I just gave up.Originally posted by 2002GreyHD150
G have a mag-hytec cover on its way. Should be here mid week.
The Mag cover has a built in o-ring style seal.
whatI can do is trace the outline fo the mounting flange on a piece of medium thickness poster board. then use some scribe/calipers & measure the lip for you...
got a fax machine? PM me some digits. I will fax you a to scale drawing.
Rob W
IN MEMORY OF
Blake (Fuzion) Finnel 12-3-1986 - 08-11-2007
NHTOC #120
Whittling away at the Hd bracket, we will be liberated. No more will we have to move our exhuast,,,We shall,,,,,Sorry Paint ^5$3@@( fumes.
D-G ok.. I will see what I can do... My scanner isn't the most cooperative...
I guess I could run the drawing up to Kinkos & have them scan it for me
I'll let ya know.
Rob W
Let me know if I can help you and Paul out,, I got to go get Tacky now,,,,,,,
I think ill put one of these on the list too... cant have that air end getting all squirley!
great looking piece!
Garret... how long until a proto is ready to street test?
I will gladly cough up the cash for the materials & rough labor costs...
Are you thinking we will need a floater kit for the leaf springs as well? or will there be enough movement in the heim joints/rod ends for articulation misalignment?
I'm in... PM me a $$
Rob W
If it's a crazy fixed drop so to speak. I could make a taller diff. bracket. However if one is Hydraulic or Bagged,, and you raise and lower the vehicle with said system,,,I don't think it would be such a good idea to run something of this nature. It would bind up at one (pull it's self in and out of it's designed range or it's semi-fixed arch) point or another on the trip up or down causing undo stress on the panhard and other parts of ones suspension..Originally posted by 2002GreyHD150
Garret... how long until a proto is ready to street test?
I will gladly cough up the cash for the materials & rough labor costs...
Are you thinking we will need a floater kit for the leaf springs as well? or will there be enough movement in the heim joints/rod ends for articulation misalignment?
I'm in... PM me a $$
Rob W
Last edited by Dbl G; 12-15-2005 at 08:50 AM.
Oh yeah & jow much do you charge for Welding Classes? You weld so Purdy!
Rob W
If you want something bad enough,,,,,,Make it. I got tired of being snubbed, pardon the pun. Incorporated the snub....
Umm, trace and check and tack. Rifinito
All tapped out,,,,,