sorry to hijack, but do you have info on street scene, how i can order from them?
sorry to hijack, but do you have info on street scene, how i can order from them?
Last edited by 03blkharley; 06-20-2006 at 10:00 PM.
Ayrton,I had it all measured,just the spindles,it's a net 2",I'll search my pics and post it up
Fuz...just a taste,spindles + Hotchkis TVS,some rubbing,trimmed the fender flare,but it was still too low for the streets where I live...I'll post some actual pics
Front Belltech spindles + Hotchkis springs 13 3/4"
Rear Hotchkis leafs + shackle 14 3/4"
This Pics were from before I put the spacers up front,I now have one more inch,perfect alignment without camber kit,only the stock ones.
Other thread with...same pics...to be updated
Last edited by Hoffmann; 06-21-2006 at 07:00 AM.
Hoffie... i over your truck everytime i see those pics
Thank's S|ck
Last edited by Hoffmann; 06-21-2006 at 07:01 AM.
Thanks guys....
I have some custom A arms that net a 2" drop, but I want to run a taller spring with the Belltech spindles. I tried to modify a set of stockers to correct the severe bump steer, but I think the BT spindles will help.
And if that won't work, I will convert it to coilovers.
That Low, in the snow? Need a "COW CATCHER" in front like the old locomotives.
http://www.streetsceneeq.com/
I ordered all mine from Stylin' Concepts.
I haven't got to take any more pics lately, and never got around to cutting my stock springs either. My truck has a blown motor again and is at the dealer till who knows when.
Ayrton, the spindles yield a full 2" drop by themselves and do not change the camber like springs or a-arms do (thus my tire fitment problem).
Last edited by rlp; 06-24-2006 at 02:26 PM.
that sucks, when did you blow it?
Camber/caster is not an issue, but the bump steer is. At some point I will get around to messing with mine again.
It happened on 6-6-6 on the way home from work. I should find out on Monday the extent of the damage--motor only has 3,000 miles on it.
wow sorry to hear that man. i cant believe how many blown motors there are with these trucks....
2001 Harley Davidson F150 SuperCrew w/ many mods SOLD
Hey Harleydude...it's just like your signature...IT NEVER ENDS !!!!!!!...
O.K. Let me get this straight since I'm getting alittle confused on your set up. You now have Belltech spindles on your front with stock springs. This is a 2" front drop. What else are you using to get the 4" drop in the front? And the rear you reinstalled your hanger set up?
I use to have the Western Chasis 4/6 kit and it did lower the rear~ 1" lower in the rear so I had to get support bags to compensate for it. I then sold my truck and will have another one comin up this week. So since then I'm lookin for the same set up or better before go out and buy it.
It had the Belltech spindles AND springs to gain a full 4" front drop. Now, I just run the spindles only for a 2" drop.
phil, wow long time no see! glad to see you're getting another HD