Results 1 to 5 of 5

Thread: 99 Lightning Blower Set-up for Harely

  1. #1
    Registered User
    Name:


    Join Date
    May 2005
    Posts
    88
    Like
    0
    Liked 0 Times in 0 Posts

    Embarrassed 99 Lightning Blower Set-up for Harely

    I have currenty have decided to detail out this set-up since nobody seems to want to buy it. If anyone is interest in this set-up please email me before I start polishing and painting. I live in central FL and would prefer someone to pick all this up, but will ship some lighter part if I have too.

    What I have that needs to go:
    (all parts have 45,000 miles on a almost stock truck)

    - 99 Blower
    - Black Harley Plenum with polished ribs
    - OEM Lightning Throttle Body with TPS
    - 99 Mid Plate
    - 99 Lower Manifold
    - Fuel Rail
    - EGR, heat sheild and Tube to Exhaust
    - IAC Valve
    - Thermostat with housing and gasket
    - All gaskets and bolts
    - Alternator Bracket
    - Intercooler intake Tubes
    - All the electronic and bracket on the left side of the blower.
    - Most of the rubbber hoses that attach to the blower
    - Idler Tensioner for S/C Belt
    - Passenger valve cover pcv valve
    - 80mm complete intake (from TB to airbox)
    - 80mm Lightning Airbox with K&N filter (missing svt badge)

    I want $1,800 for everything, or best offer. Year of truck won't matter this gets installed on, bolt pattern from the lower manifold to block is all the same. There is no intercooler included. Mid-plate is the one that came with the intercooler recall.

    In addition I have projects that have changed and parts I will never use:

    $50 - 12" 90mm filter with mas tube (no electronics, new)
    $40 - PSP intake box (modified for bottom feed 4" hose)
    $20 - PSP support bracket for 12" filter (powdercoated black)
    $45 - Repolished Billet adpator plate for 12"/90mm (looks much better than the way it came stock)
    $10 - REM Oil Separator (Used with slight crack in cup)
    $20 - T-Bolt clamps (3) 4.31-4.62 (1) 4.06-4.37
    $45 - 4" ID Black Hump Hose (4-ply construction)
    $80 - Oem Lightning computer (pcm)
    $10 - Ford Racing Breather cap (sealed, appearance only)
    $25 - 8 BR7EF's (new, never gapped) #3346
    $10 - OEM Lightning Supercharger Pulley
    $40 - MotoBlue Overdrive WaterPump Pulley
    $40 - 12" electric fan (new)
    $50 - 4R100 Valve Body with JDM Valve
    $275 - Percision 4:10 gears for 9:75 Rear End
    $300 - Lightning 5" Aluminum Driveshaft

    Pics in link below

    http://fordtruckworld.tenmagazines.c...81-album-49800
    Last edited by MMCustomworks; 04-05-2006 at 10:44 PM.

  2. #2
    Newbie
    Name:


    Join Date
    Apr 2006
    Location
    Southern Cali
    Posts
    225
    Like
    0
    Liked 0 Times in 0 Posts
    how much for the sensor bracket
    Last edited by Deviant; 04-16-2006 at 03:21 PM.

  3. #3
    Registered User
    Name:


    Join Date
    May 2005
    Posts
    88
    Like
    0
    Liked 0 Times in 0 Posts
    Trying to sell the blower set-up together first.

  4. #4
    Newbie
    Name:


    Join Date
    Apr 2006
    Location
    Southern Cali
    Posts
    225
    Like
    0
    Liked 0 Times in 0 Posts
    ok thats fine if however that doesnt work then go ahead and let me know. Thanks.

    P.S. Let me get this straight this is the one that is on the drivers side of the blower

  5. #5
    Registered User
    Name:


    Join Date
    May 2005
    Posts
    88
    Like
    0
    Liked 0 Times in 0 Posts
    Will do and yes the bracket is on the driver's side.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •