I try to install the front rotors and had alot of problems. I have the decelarotos from baers. They slide in, but not far enough so there is a big gap when you replace the brake clamp with the big bolts. Please help is you can.
I try to install the front rotors and had alot of problems. I have the decelarotos from baers. They slide in, but not far enough so there is a big gap when you replace the brake clamp with the big bolts. Please help is you can.
did the bearings seat over the spindle (were you able to put the nut and washer on the spindle???? Did you get the correct rotors?? Did you slide the caliper (the thing with the brake pads in it) back??
Last edited by 2manytrucks; 04-20-2006 at 10:51 PM.
i was able to slide the rotor back on, put the outer bearing, washer, axle nut, pin back on. However when i went to attach my main brake bracket(big bolts) back on, there were a lot of space between the bracket and the main holes. i called the company and they said there were the correct rotors, cuz of the number stamp on the sides.
Compare them to the stock ones. If they are thicker, they are for a lightning and won't work. When I bought my rotor pros, they accidently shipped a lightning rotor and it wouldn't fit. I had to do some digging to find out what the problem was.
Rusty
Rusty
2006 F250 DSG HD
Black 2003 #00023 - SOLD
R.I.P Blake "Fuzion" Finnell
What part numbers are on the box. I'll check it out for you. Mine fit like a glove.
If it's not BLOWN it must suck.
Riverside Parts Distribution Center
Complete O.E.M. Ford Parts Source and distributer of many aftermarket accessories. See our SV section for our line sheet or call toll free (877) 839-5902
Riverside Parts Distribution Center website Or e-mail me direct at mnobles@gmail.com
Bar540910-20
Originally Posted by 03HDTruck
Sorry i missed your post. That is not the correct # you need pn 54092-20
the company wont exchange it or refund my money. I will never buy from that company again.
does not Pepboys or something liek that sell them.?????
If it is a Lightning part number then sell them to the NLOC Boys...
link? site?
If you bought these new i dont understand why they would not exchange them for you. Baer has a very good product and they stand behind them. I would contact there constomer service dept.Originally Posted by 03HDTruck
Baer, Inc.
3108 W. Thomas Rd.
Suite 1201-Q
Phoenix, AZ 85017
8:00AM - 5:00 PM (Arizona Time)
Phone: (602) 233-1411
Fax: (602) 352-8445
i bought them thru rpmoutlet. i didnt know until recently that people where having problem with them. When i sent them an email to echange them, they never respond and it's past the 10 days.