Looks great! Are they going to be covered or is that an extra option or is that left to us? Either way I am in. Thanks for the work, Fep!
Looks great! Are they going to be covered or is that an extra option or is that left to us? Either way I am in. Thanks for the work, Fep!
You forgot to read
Originally Posted by fepony
looking good!
First fitting of the top and bottom. They are rabbited so they sit down inside and seal up very well. I am going to add a thin seal just to make sure there is zero air leaks.
Last edited by fepony; 08-19-2007 at 04:12 AM.
The sealed, airtight boxes are 1+ cubic feet, which is perfect for 10" sub. We are getting close to a finished product. It will bolt down to the exististing holes in the floor in front and on the sides at the rear. It will also fit between the little ears that exist in the rear that holds the outer console cover. It will come with all needed hardware (4 extended length bolts, washers and 2 wing nuts). The only thing you'll need to do to mount these is remove console lid, the inner bucket, it's frame and the outer console cover. Drop the box in and bolt it down and reinstall the outer console cover and lid. If you choose to cut the bucket to make it fit back in and completely hide the box (except for the top) you can do so.
Any suggestions from anyone?
Finish and take pics with one installed! lolOriginally Posted by fepony
Gotten any farther with this project? I've already found the sub and amp I am going to use! but I'm not telling which ones cos they are awesomely cool and will kick @ss in the looks department! (And I don't want any copy-cats lol)
yea, any updates?
Let's see it installed
Here are some pics of the test mule and what's going on. We are almost complete for installed unit. The price will be $175 plus shipping. Add 3% for paypal. Order must include shipping address and size of speaker being used, upfire or downfire. 6,8 and 10 inch speakers only. There are 7 units available at this time.
Pic 1.
This shows the rear fegs on the bottom of the subbox. The front legs are shown there too.
Pic2.
This shows the positioning ears for the rear of the box being glued on.
Last edited by fepony; 06-01-2006 at 03:18 PM.
that looks very sweet!
is it gonna have the plexi-glass thing on the top???
If you choose to put one there you can. Both the top and bottoms will be removable so they can be customized. I'm trying to keep the cost down, yet still be able to mod it if you want to. The front legs will be adjustable and removable so it will fit everyones truck. The rear positioning ears will allow the mounting screws to go all the way thru the box so they can be tightened down from the inside, in the back by using the existing dogears.Originally Posted by s|ck
looking good fep!!!
Let us know when you instal it and get some pics up in here.
Will do my brother. Sorry it's taking so long but like I said i'm trying to work out all the bugs and keep it as simple as I can.Originally Posted by firemedix911
Here's a few pics of parts being cut and readidied for assy.