-
wtb guage cluster for sc h/d
hey looking for a guage cluster with 50k or more for a sc 02 h/d
any info on where i could find one thanks
-
Registered User
Name:
Ebay
Though you will need to have the dealer reset the PATS and correct milelage.
What happened to yours?
if the circuit board on the old cluster is still good Ive been told you could swap out the boards from the old cluster to the new cluster and you would not have to reset anything.
Tazz
Last edited by Tazz; 07-13-2006 at 03:57 PM.
-
-
ResFirma Mitescere Nescit
Name: stew
should be correct there tazz...can swap the boards...pats wont have to be reset, or mileage....but will have to recalibrate the MPH as his is a 100mph and would be dropping in a 130mph...
-
-
re guage cluster
thanks for the reply so are you guys saying there's one on ebay? and what do you mean about 100mph and 130mph my cluster reads 130mph the reason
im looking for a new guage is my old one the od#'s are not working they read
*&^% no trip, only the rpm and mph work. when it used to work it read 57k
-
-
ResFirma Mitescere Nescit
Name: stew
ah then all you should have to do is swap the board......taht is incase the board is still good....
if not then yes you would have to have them reset thhe pats and correct the mileage for you..
see that is what you get when you aZZsume things...lol
Just go to EBAY and start looking for them.....cause the dealer is gonna be murder..unless you still have warranty..
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules