-
My Screename doesn't work
Name:
4x4 Pan
Coming home today i hit a large bump on the road and bent my trans. pan so now its got a leak where the drain bolt is at.
I already have the FTVB, so only need the bigger 4x4 pan.
Well let me know, Thanks.
-
ResFirma Mitescere Nescit
Name: stew
probably not what you want to hear...but a B&M or moroso is probably what you should get...low profile, holds more than the 4x4 pan and does not hang down lower like the 4x4 pan will.
-
-
My Screename doesn't work
Name:
how much does the moroso one cost??? and where can i get it?
-
-
ResFirma Mitescere Nescit
Name: stew
if you are willing to roll the dice on one...had a lot of issues with shoddy welds and leaking a while back...
but...think the chickenman on NLOC has them...not sure if any of our svs carry them..
main reason I went with B&M...no worries..same capacity....
-
-
Around When I Can...
Name:
I'm looking at getting a new trans pan too... mines dented in. Ooops!
*Edit... just checked Chikenears site... appears he does not sell the other trans pans anymore.*
Oh hell... another edit:
LFP has them....
http://lightningforceperformance.com...&cPath=116_220
B&M Deep Finned Aluminum Transmission Pan w/Filter $174.95
Moroso Deep Aluminum Transmission Pan w/Filter $174.95
So either way you go... same price
Last edited by Fuzion; 09-05-2006 at 10:56 PM.
-
-
My Screename doesn't work
Name:
which one are u going with fuz???
-
-
Around When I Can...
Name:
More than likely the B&M after reading Stews post. But i need to figure out how deep it hangs. I know the Moroso sits about dead even with the frame rail.
I am going to call B&M tomorrow since their site doesnt list the depth of there pan. The Moroso comes in at 3.642 inch. So i'll have an answer tomorrow night on how deep the B&M is.
The Ford Racing pan doesnt look that tall either... but i'm worried about one part. So i'm still calling B&M tomorrow.
For the mean time, you can put your stock pan back on.
Last edited by Fuzion; 09-06-2006 at 12:10 AM.
-
-
My Screename doesn't work
Name:
I would if i didnt punctured holes on it when i installed the FTVB.
I think im just gonna go with the regular 4x4 pan.
-
-
ResFirma Mitescere Nescit
Name: stew
QUOTE=Fuzion]More than likely the B&M after reading Stews post. But i need to figure out how deep it hangs. I know the Moroso sits about dead even with the frame rail.
I am going to call B&M tomorrow since their site doesnt list the depth of there pan. The Moroso comes in at 3.642 inch. So i'll have an answer tomorrow night on how deep the B&M is.
The Ford Racing pan doesnt look that tall either... but i'm worried about one part. So i'm still calling B&M tomorrow.
For the mean time, you can put your stock pan back on.[/QUOTE]
all ya had to do was ask for a pic...LOL it hangs down about as much as the stocker and still holds 3-4 more qts of fluid.....defintely not as far as the 4x4 pan...will see about snappin a pic for you guys..
here is one unistalled...
[
Last edited by bgstew6; 09-06-2006 at 06:23 AM.
-
-
Around When I Can...
Name:
B&M said it will hang below the frame rail. Waiting on a picture from Stew.
As of now, i think i might go with the Moroso. I'll just get it rewelded. HAHA
-
-
ResFirma Mitescere Nescit
Name: stew
like I said before they will not hang down below the frame rail...like the 4x4...should have added that they will but BOTH not more than around a half inch....
-
-
Registered User
Name:
Summit has then cheaper then LFP and you will get much sooner!!
-
-
Registered User
Name:
WELL THEY DID WHEN i WAS IN THE STORE, BUT HERE IT IS AT JEGS FOR CHEAPER ALSO...
http://www.jegs.com/webapp/wcs/store...tegoryId=10539
-
-
Registered User
Name:
-
-
Around When I Can...
Name:
Thanks for the link Dbl G!
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules