Wow this board is dead, did you guys all sell your trucks? I knew you guys secretly wanted to drive mini coopers.
Wow this board is dead, did you guys all sell your trucks? I knew you guys secretly wanted to drive mini coopers.
620rwhp / 640 torque at 15lbs on pump gas
Tuned by Pro-Dyno in Charlotte 704-651-3807
Kenne Bell 2.6H, Built longblck,Patriot III heads, Comp cams, BTS Tranny, PI 2600 Stall, 10lb lower, 3.75 upper, metco belt tench, JLP KB2.6 ram air, JLP Competition R Exhaust, Flouidine Heat Exchanger, Accufab Single Blade Throttle Body, SCT Eliminator Switch Chip, SCT 2800 maf meter, FJO wideband, Dakota Digital gauges, Metco Traction Bars, Aeromotive fuel system, twin 255 fuel pumps, 60lb injectors, gayloard x-2000, L tails, L third light, Depo headlights
JL audio TR570-CXI 5X7 & TR570-CSI 5X7, JL Audio 12' stealth box, JL audio 500/4 & 500/1 amps.
I was wondering the same thing! Still check but no new post!
JLP Ram air, JLP filter, maf ext. Volant CAI, ported & polished TB, Ext.-Honed Ceramic coated & polished Plenum w/ ZEN alum. spacer, Stage 4 ported Heaton, ported lower intake, *** oil sep., Fluidyne H/E with dual fans, Alum. W/W tank, Metco 100mm pulleys, Metco 10#lower, Mad E-fan controller, 55# flow matched inj, Twin 255s, Tr6 plugs, Bassani c/b, Magnaflow midpipe w/cats, pcv and egr gone, Greg Evans valve body w/F350 pan and SD cooler, Fully Built By Boosted Performance(Stage 3 Romeo's with Manley and TF up top, all Manley in Short, ARP holding it together), Tuned by Amazon Tuning Solutions(safe street tune), *** panhard bar, Optima red top, Autometer, Aeroforce, and AEM gauges, JL Sub, L-spec Bilsteins rear, QA1-R's up front, L-swaybar, ABM hd/lts, Ford Racing euro tails, dvd w/backup camera, and Nav., ALWAYS NEED MORE SPEED!!!!! 400/500 club and climbing!
519hp 575tq Dynojet Dyno 460hp 501tq Mustang Dyno
Silver,
I saw your truck at David's last week; very, very sharp. You will love your new set-up. No more crossing your fingers when you floor it!
I'm still around but no longer in the Harley. Maybe we'll cross paths soon.
Ron
You must of saw when it lifted the heads
Yea i'm gonna take the dive into the built motor. I cant complain, it ran at 470+ for a year. I still want to see your SRT10, i've never been in one but herd they are nice. Did you do anything to it yet? I know you wont be stock for long
Still here. I've been pretty busy with work and the family and now having the new house built, so I don't do a whole lot of stuff with the truck right now. Outnumbered and I chatted briefly when he saw me out in Albemarle right before Thanksgiving, but that is about the closest I've been to seeing or chatting with any other truck owners.
Justin
NHTOC#157 / 03 2-tone #9101
444 RWHP / 527 Ft-lbs TQ SAE
Silver, you may also want to consider the BTS tranny if you haven't already done so. Dave can take care of that as well. With the built motor and knowing that you will turn the wick up on the KB, you will need it.Originally Posted by SilverBullet
You must of saw when it lifted the heads
Yea i'm gonna take the dive into the built motor. I cant complain, it ran at 470+ for a year. I still want to see your SRT10, i've never been in one but herd they are nice. Did you do anything to it yet? I know you wont be stock for long
I'm hangin in here..
-Del
Got one, i blew the tranny up a long time ago
Got one, i blew the tranny up a long time ago
I still have my truck. But can't stay at home long enough to drive it. It hasn't moved nor started in over a Month now.
We should try to get together and have some BWW some time.
Thats not a bad idea, its been a while since the last meet.
I smell a Road Trip!!!!!
IN MEMORY OF
Blake (Fuzion) Finnel 12-3-1986 - 08-11-2007
NHTOC #120
I'm still here. Just working all the time.
Don't plan it for Jan or Feb. I won't be in town. So lets get together before the end of Dec or after March.
Posting Permissions
Reply With Quote