Well our stock belt size for a stock motor and pulley's is 67", so if you have on a 66" even with your tensior tab removed and a 2# lower that must have been one PITA to get on.
Well our stock belt size for a stock motor and pulley's is 67", so if you have on a 66" even with your tensior tab removed and a 2# lower that must have been one PITA to get on.
Have a 02 stock upper and 8lb lower with 2 100mm idlers. What size ?
Take a look at the belt-size chart. It should be identified for your config.
aka LeeRandall - NHTOC #25