How to ACtivate/Deactivate Autolock function

[bgstew6]

How to activate/deactivate Autolock function


Autolock (If Equipped)

• All the doors are closed
• The Ignition Key is in the ON position
• The gearshift lever is shifted into R reverse or a forward gear and the brake pedal is released.

This feature will also automatically relock all the doors when:

• The ignition is running and any door is opened and then closed and you put the vehicle in motion by releasing the brake pedal.

Deactivatin/Activating the Autolock Feature

Before following the procedure, make sure that the Ignition is OFF and all vehicle doors are closed.

You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds.

1. Turn the ignition key to ON

2. Press the power door unlock control three times

3. Turn the ignition key from ON to OFF

4. Press the power door unlock control three times.

5. Turn the ignition back to ON. The horn will chirp.

6. Press the unlock control, then press the lock control. The horn will chirp once if autolock was deactivated or twice (one short and one long chirp) if autolock was activated.

7. Turn the ignition to OFF. The horn will chirp once to confirm the procedure complete.

THis can also be accomplished via the Keyless entry pad

Activating/deactivating autolock with the keyless entry system

Before following the activation or deactivation procedures, make sure that the anti-theft system (if equipped) is not armed, ignition is off, and all vehicle doors and liftgate window are closed.

1. Enter 5 digit entry code

2. Press and hold 7/8 control

3. Press and release 3/4 control while holding 7/8 control

4. Release 7/8 control.

The horn will chirp once if autolock was deactivated or twice (one short and one long chirp) if autolock was activated. To re-activate autolock, repeat steps 1–4.