Page 1 of 4 1 2 3 ... LastLast
Results 1 to 15 of 60

Thread: Sway Bar Installed!!! HEL-7621

  1. #1
    BLWN HOG
    Name:

    chesterc's Avatar
    Join Date
    Feb 2003
    Location
    East Bay, CA
    Posts
    707
    Like
    0
    Liked 0 Times in 0 Posts

    Laugh Sway Bar Installed!!! HEL-7621

    I should be at Sac Raceway right now if I had NOT believed the damn weather reports. Damn weather bureau,;c it's sunny right now and dry! So instead of the track, I decided to install the Hellwig sway bar.

    Installation was not that bad, I just had to borrow a 3/4" deep socket so I can tighten the nuts on the U-bolts. The hard part of it is trying to figure out how the bar will go in.

    Safety is my utmost concern, anytime you lift the truck on one end, make sure you have chocks. So I take of the spare tire, chock BOTH front wheels, put the axles on stands and start with it. I slipped the bar before the right rear wheel, behind the shock, over the driveshaft and then let it hang for a while. Continue pulling towards the driver side and once the bar hits the tailpipes, push the tailpipes away and the bar is now in place. Grab a bottle of Smirnoff Ice, preferably ice cold.:d Everything else is just bolt-on as you go. The bracket nuts by the driver side was a biatch to tighten, I'll get that later. All the holes on the frame where visible, NO drilling, the kit came complete, everything line up as you work your way to the next step.

    First, impressions:

    1. I broke traction going through a freeway on-ramp before I felt the *NORMAL* sway the truck
    2. Gentle winding roads do not even seem to bother the truck anymore
    3. Freeway driving quality was not affected, no squeeky noises
    4. I clipped a small curb while making a U-turn, I heard a clunk. Not sure if it was the bar. Did the same U-turn later, same spot, no clunk.

    Not bad for about $170 parts and approximately 2 hours of work(includes the run to borrow the tool, raising the truck, taking pictures of the underside)
    2003 FFW-Palmdale, CA - Tough Truck Winner

    2002 HD Black
    1996 Probe GT

  2. #2
    Still Around...
    Name: Ron

    R126's Avatar
    Join Date
    Feb 2003
    Location
    NYC
    Posts
    1,554
    Like
    0
    Liked 0 Times in 0 Posts
    Where's the pic's and where or who did you order it from?Am looking to do that next(rear sway bar).........................THANKS

    Click Signature Pic For Gallery...

  3. #3
    BLWN HOG
    Name:

    chesterc's Avatar
    Join Date
    Feb 2003
    Location
    East Bay, CA
    Posts
    707
    Like
    0
    Liked 0 Times in 0 Posts
    Patience my friend.;w

    Picturetrail still is gobbling up my uploads;t

  4. #4
    Still Around...
    Name: Ron

    R126's Avatar
    Join Date
    Feb 2003
    Location
    NYC
    Posts
    1,554
    Like
    0
    Liked 0 Times in 0 Posts
    ;w Who did you order it from?

  5. #5
    BLWN HOG
    Name:

    chesterc's Avatar
    Join Date
    Feb 2003
    Location
    East Bay, CA
    Posts
    707
    Like
    0
    Liked 0 Times in 0 Posts
    Originally posted by R126
    ;w Who did you order it from?
    I got mine locally from 4 Wheel Parts. They're nationwide, look them up at http://www.4wheelparts.com . I called to order it from the store and they shipped it to my work address. There are other places like Summit Racing and JC Whitney. I bought it from them since they gave me a good deal on the BellTech shackles.

    And the pics are here!:bo:





    Last edited by chesterc; 08-19-2005 at 04:36 PM.

  6. #6
    BLWN HOG
    Name:

    chesterc's Avatar
    Join Date
    Feb 2003
    Location
    East Bay, CA
    Posts
    707
    Like
    0
    Liked 0 Times in 0 Posts






    Last edited by chesterc; 08-19-2005 at 04:38 PM.

  7. #7
    Senior Member
    Name: Chris

    Ayrton's Avatar
    Join Date
    Jan 2003
    Location
    Atlanta, Georgia
    Posts
    3,826
    Like
    0
    Liked 0 Times in 0 Posts
    Now I see why the Helwig is a “bolt on” bar…

    Looks good, and I am sure you like the handling.

  8. #8
    Registered User
    Name:

    teknics's Avatar
    Join Date
    Feb 2003
    Location
    Long Island, NY
    Posts
    810
    Like
    0
    Liked 0 Times in 0 Posts
    Not a bad buy. Im thinkin of doin the same thing.

    Where did you order it from?

    -TeK

  9. #9
    Registered User
    Name:


    Join Date
    Feb 2003
    Posts
    1,768
    Like
    0
    Liked 0 Times in 0 Posts
    Beautiful work I must have to say!!! You guys just make me want more and more and more.........self control, i need self control.

  10. #10
    BLWN HOG
    Name:

    chesterc's Avatar
    Join Date
    Feb 2003
    Location
    East Bay, CA
    Posts
    707
    Like
    0
    Liked 0 Times in 0 Posts
    HDsUpErCreWf150: I know how you feel.... ;)

    I got mine locally from 4 Wheel Parts. They're nationwide, look them up at http://www.4wheelparts.com . I called to order it from the store and they shipped it to my work address. There are other places like Summit Racing and JC Whitney. I bought it from them since they gave me a good deal on the BellTech shackles.
    Here's the box when I bought it.

    It's a Hellwig 7621, there are 2 sets of end links, short and long. I have a 2" drop shackle and I used the shorter end links.



    Good luck!
    Last edited by chesterc; 08-19-2005 at 04:39 PM.

  11. #11
    Registered User
    Name:


    Join Date
    Feb 2003
    Location
    Livermore, CA
    Posts
    567
    Like
    0
    Liked 0 Times in 0 Posts
    Nice mod, ChesterC!!

    Man, I'm jealous of all these new mods you guys are doing. Unfortunately, got bad news from the tax man this year so there won't be any $$ for mods for a while

    Besides, doing a major addition/remodel to the house right now so every extra dollar goes there. Oh well, at least I own one of these beauties!!
    2005 Harley-Davidson Roadglide

  12. #12
    Registered User
    Name:

    teknics's Avatar
    Join Date
    Feb 2003
    Location
    Long Island, NY
    Posts
    810
    Like
    0
    Liked 0 Times in 0 Posts
    Bill I just got all my paperwork back from the accontant. State raped me, and im getting 2 back from them. Uncle Sam however was very generous again.

    Unfortunately that money is alread spent on a super-secret mod. ;Y

    -TeK

  13. #13
    World's Fastest Street HD
    Name: Josh

    Harley#356's Avatar
    Join Date
    Jan 2003
    Location
    NJ
    Posts
    31,073
    Like
    0
    Liked 6 Times in 6 Posts
    good mod its on my list, just not sure when i'll get to it.

    thanks for posting the pics too
    its been awhile since we've seen any of your master photography

    M.HYDE: 2000 HD F-150 #0356 of 8197, Built 05/18/00, Bought 07/03/00, 700/784, 09.89@138.78
    *Worlds Fastest Street HD: '08/'09/'10/'11/'12/'13****Worlds Fastest Eaton Powered HD: 12.19@112.48 11/17/07*
    D.JEKL: 2000 HD F-150 #1552 of 8197, Built 06/20/00, Bought 06/25/09, 372/450, 13.75@099.46 (*SOLD* 10/15/11)
    REPTAR: 2012 SVTF-150 #2893 of ????, Built 01/19/12, Bought 08/26/11, ???/???, 14.93@091.30
    HASTIE: 2011 GT Mustang 5.0 6-Speed, Built 10/29/10, Bought 11/11/10, 392/352, 12.00@117.79 (*SOLD* 05/14/13)
    BADGER: 2013 Explorer Sport 3.5L TT, Built ??/??/??, Bought 05/14/13, ???/???, 14.53@096.25
    GEN.0L: 1985 XL F-150 w/'94 Lightning Donor Engine Swap, Holley Projection EFI, 03 HD Paint

  14. #14
    Still Around...
    Name: Ron

    R126's Avatar
    Join Date
    Feb 2003
    Location
    NYC
    Posts
    1,554
    Like
    0
    Liked 0 Times in 0 Posts
    Originally posted by teknics
    Not a bad buy. Im thinkin of doin the same thing.

    Where did you order it from?

    -TeK
    This is the cheapest Iv'e found it so far,am still looking:Price: $156.84 plus free shipping



    http://www.macsspring.com/website/he...rucksframe.htm
    Last edited by R126; 02-16-2003 at 01:51 PM.

  15. #15
    Registered User
    Name:

    teknics's Avatar
    Join Date
    Feb 2003
    Location
    Long Island, NY
    Posts
    810
    Like
    0
    Liked 0 Times in 0 Posts
    Well, I have a hook up somewhere for parts. Im gonna check there and see where it goes from there.

    You planning on this ron?

    -TeK

Page 1 of 4 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •