-
Registered User
Name:
JDM Saleen Upgrade Kit
Has anybody installed one of these kits yet. Mine finally showed up with no DVD, no gasket,and no expensive billet adapter and the instruction show a completly different setup than what I have for parts. Now my truck sits. I spent $1900 on this kit and Im not very impressed right now. I guess I will have to get up at 5 AM to call them (hopefully someone will answer) to get my truck back on the road.
-
On The Wrong East Coast
Name:
Well, mine is sitting at JDM ready for them to install the upgrade next week.
I am hoping its just a one time issue and I am sure Jim or Ryan will sort it for you straight away.
Kev
-
-
Registered User
Name:
Well, I got up at 5AM to call them. I have now called 4 times in the last half hour, no answer. They dont even have an answering machine or a recording. So I now have emailed them. This sucks.
-
-
Registered User
Name:
Just got a hold of a tech guy and now I have to wait for the sales guy to get in. Its looking like they changed the kit. So the really expensive billet adapter that makes the kit so expensive is no longer part of the kit. But the price is the same. Great.
-
-
Registered User
Name:
Just got off the phone with another tech he has got set up to finish now. He was very informative. Im still not convinced that the billet elbow is cheaper than a plastic one. Oh well, as long as the power is there I wont complain any more. i will post back in about 4 hours.
-
-
On The Wrong East Coast
Name:
Well, I spoke with Jim junior yesterday. JDM are actually closed Saturday and Sunday so I guess JDM Skunkworks staff must be there.
It would be Ryan or Jim Junior you would be best speaking with. They will be there Monday no doubt.
Kev
-
-
Registered User
Name:
Well I got everything up and runnning yesterday. Ran great till I was pulling on to my street and the truck completely shut down sayin" engine safe mode". First thing this morning I went back out to drive it up the street and the engine light is on and as soon as I started driving it just shut down.
-
-
2003 H/D #6809
Name:
am i the only one that is completly lost by this thread?
-
-
ResFirma Mitescere Nescit
Name: stew
hmmm
lets see put a JDM saleen Upgrade blower kit on his newer style Harley
and is now having problems...
-
-
Registered User
Name:
-
-
ResFirma Mitescere Nescit
Name: stew
-
-
Registered User
Name:
Nope not yet. I will screw with it in a little bit.
-
-
Registered User
Name:
Here are the codes:
1) P0010 A CAM POS ACTUATOR CIR1
2) P0020 A CAM POS ACTUATOR CIR2
3) P0102 MAS VOL AR FLO CIR LO I
4) P0135 OX S HTR CIR 1 S2
5) PO155 HTD OX S HTR CIR 2 S1
6) P0443 EVAP CTRL CIR ERROR
I cleared the codes and restarted the truck and the same thing happened again with the same codes. What should I do now?
-
-
ResFirma Mitescere Nescit
Name: stew
soudns like you left something unplugged
check all your elec connector.s
-
-
Registered User
Name:
I will check that but, everthing worked fine for about 200 miles. Which plugs should I look at?
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules