Results 1 to 13 of 13

Thread: The wrong kinda blown truck

  1. #1
    On The Wrong East Coast
    Name:

    KevF's Avatar
    Join Date
    Sep 2004
    Location
    Norwich, UK
    Posts
    698
    Like
    0
    Liked 0 Times in 0 Posts

    The wrong kinda blown truck

    Well, just incase ya havent seen it else where, got my nice new 2007 Harley Davidson Saleen truck over to the UK just a couple of days before Christmas. Then the Thursday after, whilst driving through the city at no more that 25-30mph, the motor blew.

    Big vibration, loud knocking then a bang. Large smoke outta back and then engine died. Got a hole the size of a golf ball on the drivers side rear of the block. The truck had covered no more than 128 miles with me (518 in total)

    Ford US warranty will sort it only if I pay to get the truck back to the US dealership.
    Luckily, I sorted a UK warranty and that seems to cover it. It's booked into Mildenhall Auto Centre to have the blown motor pulled out for the warranty company engineer to assess. Hopefully they will ok and new engine.

    So gotta wait until 15th to get it in the garage and then wait for the ok to ship a new motor over from the US.......


    All this before the first trip to Santa Pod on the 15th MArch

  2. #2
    Registered User
    Name:


    Join Date
    Sep 2004
    Location
    county durham united kingdom
    Posts
    63
    Like
    0
    Liked 0 Times in 0 Posts
    hello kev
    man thats awful i am gutted for ya that would have really devastated me,hope you get everthing sorted as soon as poss
    cheers mate andy

  3. #3
    World's Fastest Street HD
    Name: Josh

    Harley#356's Avatar
    Join Date
    Jan 2003
    Location
    NJ
    Posts
    31,073
    Like
    0
    Liked 6 Times in 6 Posts
    sucks to hear that man!

    hope you dont get boned for the JDM mods being on there!!!

  4. #4
    4Sale in the classifieds
    Name:

    C Dillon Go's Avatar
    Join Date
    May 2006
    Location
    Miles Away From Ordinary
    Posts
    3,162
    Like
    0
    Liked 0 Times in 0 Posts
    Shhhh!!

  5. #5
    "Shadow the Hedgehog"
    Name:

    Hoffmann's Avatar
    Join Date
    Jun 2004
    Location
    Jacksonville - FL
    Posts
    6,954
    Like
    0
    Liked 0 Times in 0 Posts
    128 miles? 518 total? what a shame...hoping for the best Kev...good luck!

  6. #6
    Registered User
    Name:

    zkriegel's Avatar
    Join Date
    Sep 2007
    Location
    Loomis, CA
    Posts
    83
    Like
    0
    Liked 0 Times in 0 Posts
    Do they have any ideas on what caused it yet? I have the same (JDM) setup as you and I dont even want to drive my truck. I have 4500 miles on mine now with no major problems.

  7. #7
    On The Wrong East Coast
    Name:

    KevF's Avatar
    Join Date
    Sep 2004
    Location
    Norwich, UK
    Posts
    698
    Like
    0
    Liked 0 Times in 0 Posts
    Ok....I have been told that there is a problem with crank end play on some of the engines that have found there way into Saleen.
    They have had 2 trucks go bang acutally in Saleen's factory with only 10 miles on the engines. It is/was a Ford problem.
    As soon as this problem was found there was a fix that sorted it.

    It looks as though mine slipped through the net.

    So, engine is out and waiting for another motor to be shipped over.

    Will keep you all in the loop.

    Kev

  8. #8
    "Fuzion" 1986-2007 R.I.P.
    Name: Troy

    1niceharley's Avatar
    Join Date
    Nov 2004
    Location
    Haslet, Texas
    Posts
    3,917
    Like
    2
    Liked 4 Times in 2 Posts
    Best of luck and a speedy recovery!

  9. #9
    On The Wrong East Coast
    Name:

    KevF's Avatar
    Join Date
    Sep 2004
    Location
    Norwich, UK
    Posts
    698
    Like
    0
    Liked 0 Times in 0 Posts
    Right...Looks like Ford know of this problem too.....got this from another F150 owner...

    Kev,
    I know this is not Mustang related,but i could not help but notice your mention regarding F150HD engine problem.Ford do indeed have a problem with late 5.4 motor.There is an issue with crank thrust washers breaking up.I have a nearly new HD truck in the shop waiting for a new short engine.Symptoms are noisy timing chains at idle.Found excess crank endfloat,and upon removing pan thrust washers in pieces and a nasty mess.This motor had done around 8500 miles.This also had a Roush supercharger, I had fitted when new,but this has no bearing on the fault as Ford are aware of the problem, refered to by a service message on the Ford technician information service .
    Hope this is of some interest to you.



    Will post pictures of mine when I get some later today....

  10. #10
    On The Wrong East Coast
    Name:

    KevF's Avatar
    Join Date
    Sep 2004
    Location
    Norwich, UK
    Posts
    698
    Like
    0
    Liked 0 Times in 0 Posts
    Well here's what greeted me when I got down to Mildenhall...
    John had striped the engine down and this was the damage......






















    This is not a great shot but the crap that was in the strainer !!!


  11. #11
    Registered User
    Name:

    Grey Wolf's Avatar
    Join Date
    Feb 2005
    Location
    Milwaukee
    Posts
    1,546
    Like
    0
    Liked 0 Times in 0 Posts
    Makes me cringe to see that. That is some major carnage there. How many rods ended up snapping? Hopefully you won't be down too long and she is better than new!!!

  12. #12
    On The Wrong East Coast
    Name:

    KevF's Avatar
    Join Date
    Sep 2004
    Location
    Norwich, UK
    Posts
    698
    Like
    0
    Liked 0 Times in 0 Posts
    The two rear ones on the right side of the engine went completely. One cylinder holed and the other has a serious groove in the side.......


    Warranty guy goes in tomorrow and should !!!! request a new motor so its just a waiting game........

  13. #13
    Work In Progress
    Name:

    Shadow Grey's Avatar
    Join Date
    Mar 2006
    Location
    San Diego, Ca
    Posts
    1,112
    Like
    0
    Liked 0 Times in 0 Posts
    Damn...when she went, she went. Haven't see that much damage on some highly modified blown motors. Best of luck in getting her back on the raod again.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •