Results 1 to 2 of 2

Thread: "How to" - Blinkers/turn signals do not work

  1. #1
    Registered User
    Name: Randell

    lerandell's Avatar
    Join Date
    Feb 2005
    Location
    San Antonio, TX
    Posts
    116
    Like
    2
    Liked 2 Times in 2 Posts

    Arrow "How to" - Blinkers/turn signals do not work

    Just wanted to share my issue I found. This is spesifically for my blinkers/turn signals not working. The simptoms were that sometimes when i turned on my turn signal it would buzz and flash wildly. Then it wouldnt work for a few days, then it would work again. After a while I also discovered that moving the stering wheel tilt up and down messed with it.
    What I found was that the locking clip on the electrical connector of the turn signal lever was broken off. The connector was rocking out of the socket and causing intermitant connections. As a quick fix I looped a rubber band around the harness and tied it around the socket.
    Randell Kelly
    Black 2003
    http://www.kellymanor.com

  2. #2
    Registered User
    Name:


    Join Date
    Feb 2009
    Location
    Mansfield, TX
    Posts
    89
    Like
    0
    Liked 0 Times in 0 Posts
    I will try that mine does the same thing. Will let u know if i find another solution

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •