Results 1 to 8 of 8

Thread: Using the Kevin Brown Method

  1. #1
    Worlds Shiniest HD F-150!
    Name: ]\/[ike

    Merlin's Avatar
    Join Date
    Jul 2009
    Location
    Sunny South Florida
    Posts
    4,288
    Like
    45
    Liked 165 Times in 135 Posts

    Thumbs up Using the Kevin Brown Method

    I believe I understand the majority of theory of the KB Method for polishing paint.
    Two polish products MEG 105 and 205, LC pads and a unique technique.
    The results are amazing!

    I used the DA PC7424XP for correction and polishing, with the LC backing plate & LC Orange, White and Black pads with the DA versions of MEG 105 & MEG 205.

    Products and Process as follows:

    1) Prime the polishing pads by pressing M105 into the pad w/finger until the entire surface is covered.
    2) Apply an "X" or a "circle" pattern of liquid to the pad.
    3) Don't spread, just work it in a 4'x4' section, moving DA slowly. Do 2'x2' on a heavily damaged area.
    4) Cut is pressure dependent - overlap your work.
    5) Lower DA speeds to begin with and higher pressure exerted on pad.
    6) For heavy defects high speed is required and can create fine micromarring. Use M205 to remove.
    7) The application cycle should be short and consistent in terms of applied pressure and speed
    8) Clean pads more often. Change to new pads when "on the fly" cleaning doesn't clean well enough.
    9) Final polishing step with M205 w/black or blue pads at lower speeds and very slow movement. Slow speed, slow movement, and firm pressure

    While an increase in pressure is necessary, it is not the only factor that should be addressed when using the "Kevin Brown Method".
    The speed you use depends upon what you are trying to accomplish.

    Proper priming of the pad is super important!
    This one step will have more positive effect on polishing performance than anything else. A clean pad is equally important.

    The pad should be rotating at all times. More speed is a good thing when heavy defect removal is the goal. This does not mean that slow rotation will not work. However- some pads rotate well while others do not. Oftentimes, if there is insufficient removal of defects even with a substantial amount of downward pressure, a swap of the pad to one that is more aggressive or smaller in diameter will work. The guys that are using smaller diameter pads to remove heavy defects are working smart- not hard.

    After all of the defects have been satisfactorily removed, final polishing should be accomplished using the softest or mildest pad available.

    For final polishing, prime the finishing pad as previously discussed, and let the pad sit for a few minutes. This will allow the buffing liquid some time to permeate the pore structure of the pad. Then, polish at a slow speed setting, making certain that the pad is able to rotate (it does not matter how many rotations there are, the goal is to minimize the chance of "flatspotting the pad). Add small amounts of product as needed.

    If some marring persists, super-clean the pad or replace it, re-prime, and then remove as much product as you can. There will still be some fresh and moist buffing liquid attached to the pad. Use a very slow speed setting, use constant pressure, and DO NOT lighten up at the end of the cycle.


  2. #2
    2002 DSG #2788
    Name:

    fxstbf150's Avatar
    Join Date
    Jan 2010
    Location
    Hickory Creek Texas
    Posts
    696
    Like
    0
    Liked 0 Times in 0 Posts

    Super shiny

    Damn, that is UBER glossy! I have broken every mirror in the house so I guess I should follow your advice. Uh, If the hood cracks when I look at it then I can get a ram air or cowl induction style. Cool, now I can justify the purchase. Seriously though, excellent results!

  3. #3
    Registered User
    Name: Sean


    Join Date
    Mar 2005
    Location
    Plantation, FL
    Posts
    2,336
    Like
    0
    Liked 0 Times in 0 Posts
    Damn!!! I think I'll have to make a drive to Boynton Beach so you can help me with my shine. That looks awesome!!!

  4. #4
    Worlds Shiniest HD F-150!
    Name: ]\/[ike

    Merlin's Avatar
    Join Date
    Jul 2009
    Location
    Sunny South Florida
    Posts
    4,288
    Like
    45
    Liked 165 Times in 135 Posts
    Quote Originally Posted by SoFlaHarley View Post
    Damn!!! I think I'll have to make a drive to Boynton Beach so you can help me with my shine. That looks awesome!!!
    Anytime!...bring it on over. You're only 20 minutes away. We'll have a wash, clay, polish, LSP...shiny truck day!


  5. #5
    Worlds Shiniest HD F-150!
    Name: ]\/[ike

    Merlin's Avatar
    Join Date
    Jul 2009
    Location
    Sunny South Florida
    Posts
    4,288
    Like
    45
    Liked 165 Times in 135 Posts

    Always do a test area first!

    Remember: When detailing the least aggressive method is the best.

    Tape off several 2'x2' areas (with painters tape)

    Use Megs 205 (Light cut/semi finish polish) and a Lake Country white pad (minimal pad bite).
    Do this section check results.

    If results not met,
    Try Megs 205 again and a Lake Country orange pad (more pad bite).
    Check again.

    If results not met,
    Try Megs 105 with a LC white pad.
    Repeat process.

    if results not met,
    Try Megs 105 with a LC orange pad.

    Then use KB Method in above post.

  6. #6
    Registered User
    Name: Sean


    Join Date
    Mar 2005
    Location
    Plantation, FL
    Posts
    2,336
    Like
    0
    Liked 0 Times in 0 Posts
    You have to posts pics of the whole truck.

  7. #7
    Worlds Shiniest HD F-150!
    Name: ]\/[ike

    Merlin's Avatar
    Join Date
    Jul 2009
    Location
    Sunny South Florida
    Posts
    4,288
    Like
    45
    Liked 165 Times in 135 Posts
    Quote Originally Posted by SoFlaHarley View Post
    You have to posts pics of the whole truck.
    I have a few pics. Just not any that really show off the whole shiny truck.





    I'll try getting around to taking a few this weekend and post 'em.

  8. #8
    Worlds Shiniest HD F-150!
    Name: ]\/[ike

    Merlin's Avatar
    Join Date
    Jul 2009
    Location
    Sunny South Florida
    Posts
    4,288
    Like
    45
    Liked 165 Times in 135 Posts
    Quote Originally Posted by SoFlaHarley View Post
    You have to posts pics of the whole truck.
    I finally got around to getting some pics.



    For NHTOC album click HERE.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •