Results 1 to 8 of 8

Thread: Need help !!

  1. #1
    Registered User
    Name:

    HajiHunter's Avatar
    Join Date
    Sep 2007
    Location
    Fort Knox KY
    Posts
    123
    Like
    0
    Liked 0 Times in 0 Posts

    Need help !!

    Ok i am replacing the lower pulley with a number 6 and everyone keeps telling me that the one they sent me from LFP is wrong but LFP says its right and they just dont know what they r talking about because the mechanics that have looked at it says they can make it work but dont know what to do with the trans lines that is attached anyone got any pics what they did with the trans lines and after they put a #6 on ?

  2. #2
    needs more cowbell!
    Name: Sheridan

    steinjr's Avatar
    Join Date
    Sep 2005
    Location
    Dallas, Texas
    Posts
    3,945
    Like
    1
    Liked 2 Times in 2 Posts
    You need to take the existing bracket and bend it to hold the tranny lines out of the way of the pulley.
    Yes officer... I am aware of how fast I was going!

  3. #3
    #4954, 12APR01
    Name:

    kromdom's Avatar
    Join Date
    Sep 2003
    Location
    SoCal
    Posts
    6,126
    Like
    0
    Liked 0 Times in 0 Posts
    have you already read/reviewed these (stickied in the HOW-TO section): http://www.nhtoc.com/vbforum/how-art...find-here.html

    -Lower Pulley Swap: (Thanks Venom!)
    How - to lower pulley swap - National Harley Truck Owners Club

    -Lower Pulley Tips: (Thanks Everybody!)
    Pulley Install Help Needed! - National Harley Truck Owners Club

  4. #4
    World's Fastest Street HD
    Name: Josh

    Harley#356's Avatar
    Join Date
    Jan 2003
    Location
    NJ
    Posts
    31,073
    Like
    0
    Liked 6 Times in 6 Posts
    yep you just bend the lines out of the way. I've got a 10 lber on mine. That suckers the size of a dinner plate, and the trans lines still fit fine LoL! Just gotta move them a tad.

  5. #5
    Registered User
    Name:

    HajiHunter's Avatar
    Join Date
    Sep 2007
    Location
    Fort Knox KY
    Posts
    123
    Like
    0
    Liked 0 Times in 0 Posts
    ok good deal been looking for a locking tool now but mark at lfp told me to use i screwdriver and i should be able to lock crankshaft with that what u all think ?

  6. #6
    World's Fastest Street HD
    Name: Josh

    Harley#356's Avatar
    Join Date
    Jan 2003
    Location
    NJ
    Posts
    31,073
    Like
    0
    Liked 6 Times in 6 Posts
    I rigged mine with a wrench before,, but it is a lot easier to do with the converter lockup tool. LFP should be able to sell you just the tool for a couple bucks.

  7. #7
    needs more cowbell!
    Name: Sheridan

    steinjr's Avatar
    Join Date
    Sep 2005
    Location
    Dallas, Texas
    Posts
    3,945
    Like
    1
    Liked 2 Times in 2 Posts
    I have used a screw driver to lock up the converter.

    Just remove the bottom rubber grommet and push a large screw driver in the opening at an angle to lock it up. You may need someone to hold it in place while you remove the crank.

  8. #8
    #4954, 12APR01
    Name:

    kromdom's Avatar
    Join Date
    Sep 2003
    Location
    SoCal
    Posts
    6,126
    Like
    0
    Liked 0 Times in 0 Posts
    give LFP a call about getting the lock strap tool (the silver thing in the pic below)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •