-
Registered User
Name:
How to program your pats key
If you want to add a key or replace your worn keys.
1-you will need two keys to program any new keys.
2-make sure your new cut keys function properly.(operation in cylinder)
3-install 1st working key in ignition and start engine and run for 1 or 2 seconds.
4-withing ten seconds insert 2nd working key and start engine and run for 1 or 2 seconds.
5-insert new key within 10 seconds and turn it to run and leave it there for 1 second and turn back to off.
6-your key is now programed.start vehicle and enjoy.
I found this to work very well and easy to do.I cant believe that someone would charge $50 or more to do this.
Hope this helps someone before they get ripped off.
-
Registered User
Name: Don
what if you only have 1 key? looking to purchase/program a second. tks
-
-
Registered User
Name:
Only 1 key will require a locksmith/dealership the only alternative I am afraid.
-
-
2002 H/D Build # 7944
Name:
i only had 1 key & yes off to the dealership I went, they have to plug some sort of computer into the obd port & reflash. amazingly they never even charged me
-
-
World's Fastest Street HD
Name: Josh
Home depot can program additional keys if you only have 1. probably cheaper than the dealer.
-
-
Registered User
Name:
I recently went to Home Depot recently and they told me they cannot help me cause of the type of key....
-
-
World's Fastest Street HD
Name: Josh
Need to make sure they have a person come in who can program them. They aren't home depot employees, its a subcontracted sort of thing. I'm guessing not all home-depots have it.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules