Results 1 to 4 of 4

Thread: Help

  1. #1
    Registered User
    Name:

    jbt21479's Avatar
    Join Date
    Jun 2010
    Location
    Yukon, Ok
    Posts
    28
    Like
    0
    Liked 0 Times in 0 Posts

    Help

    I just did the spark plugs and cleaned the IC on my 2002. Got it all put back together and started her up. Engine is purring nicely! You should have seen the spark plugs! I think they were the original plugs.

    Anyways, took if for a spin and my transmission is shifting very hard. I have been looking for about an hour to see if I missed a vacuum hose or somthing when reconnecting everything. It wasnt shifting this way before.

    Also, my SERVICE ENGINE SOON light came on. But I was going to give it a day or so and see if that goes off before I start on that.

    Any suggestions on the tranny?

  2. #2
    Word
    Name: Kevin

    Blind's Avatar
    Join Date
    Oct 2009
    Location
    Hella NorCal
    Posts
    2,370
    Like
    127
    Liked 63 Times in 58 Posts
    the check engine light is related to the tranny shifting hard, check the codes!

  3. #3
    Registered User
    Name:

    jbt21479's Avatar
    Join Date
    Jun 2010
    Location
    Yukon, Ok
    Posts
    28
    Like
    0
    Liked 0 Times in 0 Posts
    Okay, Ill go have them pulled.

  4. #4
    Registered User
    Name:

    jbt21479's Avatar
    Join Date
    Jun 2010
    Location
    Yukon, Ok
    Posts
    28
    Like
    0
    Liked 0 Times in 0 Posts
    Finally found it. It was my fault. I didnt click the TP sensor connector all the way into place.

    I feel like a rahtard. But the truck is running great now!

    DSC_0125.jpg

    Before
    ic 1.jpg

    After
    ic 2.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •