Who here has put the Bazooka tube in their truck? Id like to see some pics.
Who here has put the Bazooka tube in their truck? Id like to see some pics.
I have, but I don't have any pictures at the moment.
Here is a pic. The seat holds the bazooka tube really well. It doesn't require any straps or anything. You will have to remove the chrome piece on the end of the seat handle to get the tube slid in while the seat is folded forward half way. Once you have the tube in place then lock the seat back in the upright position and re-install the chrome piece. The wiring can either be run under the rear center console or hide it under the seats.
Found my new mod....anyone interest in this I can probably get them at a pretty good discount...NOT TRYING TO BE A VENODR...just helping out.
Well I think I was just sold on what I need to do. So more info please which one is that. Model Number please.
Tooned by Me, Cogged Kenne Bell 2.3, 4-Link on Coilovers, Pan Hard Bar, Hitman Intake W/Slot MAF and Big O, JLP Plenum, 97 Rails, Jabsco Pump and KC, Dual Aeroforce W/Analogic, LFP Valve Body, Hellwig Sways, LT's W/Bassani CB, X-Brace, Hydroboost with SSBC Brakes
Well, that looks fine with me. What head unit are you using? I want to stay stock really, not looking to spend alot of money. Just need some beat.
With the 6" tube with the 100 watt amp it is a plug and play system. Quick connect to the back of your factory head unit with the F.A.S.T connect and then run another line by Bazooka back to the tube and plug into tube...many say from start to finish is about 20 mins with no cutting or splicing of the wires. the one thing that i think is really cool is you could run the same wire set up in a daily driver and one in the week end driver and just swap tubes back and forth with a quick connect...basically multi vehicle Amp and sub but just one price and one piece
BT SERIES SUBWOOFER TUBE 6 100W | eBay
BAZOOKA FAST-1770 FAST HARNESS 84 & UP LINCOLN MERCURY | eBay
Bazooka FAST-BTAH Fast Extension Cable | eBay
I think this is all you need...all under $150 to your door...way cheaper than what i can buy it for.
nice.. i did the 3rd seat mod.. i am sure it will fit. Adding this to my list.
Thanks for the info.
Just a heads up. If you plan to use an aftermarket head unit you will either need to buy the powered bazooka tube or use an amplifier on the non-powered bazooka tube. I've got one of the powered bazooka tubes under each of my back seats and I still have the rear center console in place. I used two of the Bazooka BTA6100's. I'm glad I could help bring a new mod to forum.
Okay just found the Bazooka tube I need!! Yes the knob is functional..it is your gain...braided line is your wire...8" 150 amp
anyone here thaught bout building a box for underneath the seat? like a down fire box possible ported with a shallow mount 10'' sub or 8'' sub? its doable. ive been designing the system for my truck but. yall prolly wouldnt like it. in a short story: 2 10's 1000watt amp ported box.
behind the back seat im good with F/G shaping and molding so i planned on cutting the back pannel where the storage is behind our rear seats and molding a F/G pannel with a sub behind each back seat. and use black carpet on the outter face. that would allow for the use of both subs in one box ported. but you loose the storage. and not the function of the back seats. and it looks all stock and the amp can go eather under a seat or frenched on the box for display with plexi glass
Im not going crazy anymore. Last truck I had I spent too much on the sounds and was always worried about it gettin stolen. Thats why Im gonna keep the stock head unit with just a little thump.