gonna get this one done this weekend. so the 02 has the lights in the front doors. i should be able to tap this light and run a wire to the rear doors and all be good?
gonna get this one done this weekend. so the 02 has the lights in the front doors. i should be able to tap this light and run a wire to the rear doors and all be good?
man that driver side boot is a ***** to get a wire thru. i gave up after a few hours.
The trick I did was use flexible speaker wire and a plastic snake...it went right in.
Once in place I soldered the two wires to the light and I was done. 5 minutes.
coat hangers aren't flexible enough to work really well for snaking wires.
find a buddy who does low voltage wire installs like telco/coax/ethernet and borrow their fish tape, that stuff works great.
i eventually got it thru with the coat hanger it was snaggin in the ruuber boot cause the end was pointy. only driver side was hard. and my biggest problem is i have my doors sound deadened. so had to cut a hole for my arm and hanger. then no place for light to go thru.
let's see the finished pics.
Same pic as the other thread.
I like the chromed look HD logo.
Mods=L&S Oil Sep, Blackwood trim & mirror caps, Navi ant' base, E-brake pedal, CAI, C&L Intake & Plenum, 95mm MAF tube, SBTB, 170 T-Stat, Predator+RWTD custom tune, 8# lower, PG Ti900.7 amp, JLA XR570-CXi & Stealthbox, FTVB, Finned Trans Pan, Line of Fire LED, J-Jent Grille, RotorPro Dimpled & Slotted rotors, LED taillights, chrome door strikes, billet locks & coat hangers, ChickenEars Engine Billet package #1&2+door sills, Metco billet aux idler bracket & pulleys, LFP E-Fan, Xenarc HID heads, clear corners, Roush HID fogs, Bedrug, L' 3rd, Kenwood DDX-7017 DVD+TV+Sirrius+RevCam, Lotek dual pillar pod with AutoMeter boost gauge & DynoJet WBC, fog switch mod, UPR billet window switches and door locks, FAST overlays, LFP 58" bars, Hotchkis TVS, Bilsteins, DblG Panhard, Cervinis Cobra R hood, BFG T/A KDW 2 tires, Hawk Ceramic pads, MGP caliper covers.
Sweet!! I want to do this, but have much more crap to do first. Need a 3rd job
Almost 2 years later and all but one light has crapped out. And the one that still works flashes on and off randomly. Checked connections and the power is still there just no lights working anymore. Gaaaaaay
This is good to know. Can't you replace the LEDs themselves?
Mine are still working fine with no issues.
Did you contact the person that made 'em for support?
http://thedoubleaa.com