Results 1 to 2 of 2

Thread: no reverse help!

  1. #1
    Registered User
    Name: sue


    Join Date
    Sep 2009
    Location
    n.j
    Posts
    4
    Like
    0
    Liked 0 Times in 0 Posts

    no reverse help!

    My 06 reverse made a big bang as I was backing up. got out and check to make sure I didn't run something over. when I got .
    back in my t.ruck I had no reverse. all other gears work fine any ideas?

  2. #2
    Sport90's #1
    Name: Matthew

    oki916's Avatar
    Join Date
    Nov 2007
    Location
    Tallahassee, Florida
    Posts
    4,999
    Like
    21
    Liked 23 Times in 14 Posts
    Easy & low cost stuff first....check and change your fluids & filter.

    If it's not that then perhaps, reverse clutch failure? Could be the clutches, seals, or perhaps an internal spring?

    Probably going to need to remove the transmission and tear it down to see what's going on and then repair as needed.

    Everythnig I have seen online so far said this is not an electrical issue and that it is a completely hydraulic actuated engagement.

    Also saw that a similar issue happened to a guy on another forum and the answer he got was "Usually the popping noise is the clutch failing. There is an internal spring that will pop, you are going to need to remove your transmission"

    Crazy post I saw said "put it into overdrive and start accelerate until tranny shifts hard....low and behold reverse is back and all gears are back to normal" --> Not sure I would do this

    Hope this helps

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •