Page 1 of 2 1 2 LastLast
Results 1 to 15 of 30

Thread: help!!!!

  1. #1
    Registered User
    Name: mike


    Join Date
    Jun 2013
    Location
    hammond
    Posts
    15
    Like
    0
    Liked 0 Times in 0 Posts

    help!!!!

    hi i have a 2002 HD has a misfire in cylinders 3 an 6 i notice it have a little water in those cylinders i change all coil packs an plugs do these truck have intake leaks someone please help!!!

  2. #2
    Oki 916's Dad NHTOC #103
    Name: Slick

    Sport90's Avatar
    Join Date
    May 2003
    Location
    Leland NC
    Posts
    1,871
    Like
    100
    Liked 60 Times in 49 Posts
    did you change to an aftermarket COP or stay with the OEM? There's been some discussion about quality of aftermarket. some threads on water intrusion- use search option

  3. #3
    Registered User
    Name:

    BlairTruck's Avatar
    Join Date
    Dec 2004
    Location
    Edmonton, AB
    Posts
    3,953
    Like
    7
    Liked 111 Times in 76 Posts
    Yeah the only coils that are any good are the OEM brand

  4. #4
    Word
    Name: Kevin

    Blind's Avatar
    Join Date
    Oct 2009
    Location
    Hella NorCal
    Posts
    2,370
    Like
    127
    Liked 63 Times in 58 Posts
    the water gets in the plugs because the coil rubber boots aren't sealing anymore (originals) or they just aren't made to fit right (aftermarket).

    The water leaks down on that area when the truck is washed or rained on if the seal on the hood at the firewall isn't sealing anymore.

  5. #5
    Registered User
    Name: Jake

    Braker85's Avatar
    Join Date
    Oct 2009
    Location
    Tx
    Posts
    934
    Like
    1
    Liked 32 Times in 21 Posts
    Quote Originally Posted by Blind View Post
    the water gets in the plugs because the coil rubber boots aren't sealing anymore (originals) or they just aren't made to fit right (aftermarket).

    The water leaks down on that area when the truck is washed or rained on if the seal on the hood at the firewall isn't sealing anymore.
    And this is why you always use die electric grease.....

    Email is fast..... Jake@3rdrowinnovations.com

  6. #6
    Registered User
    Name: mike


    Join Date
    Jun 2013
    Location
    hammond
    Posts
    15
    Like
    0
    Liked 0 Times in 0 Posts
    no not oem coil packs i bought some new after market packs off ebay

  7. #7
    Registered User
    Name: mike


    Join Date
    Jun 2013
    Location
    hammond
    Posts
    15
    Like
    0
    Liked 0 Times in 0 Posts
    ok but i change all plugs an packs an it still read the same cylinders but the packs are aftermarket

  8. #8
    Registered User
    Name: Jake

    Braker85's Avatar
    Join Date
    Oct 2009
    Location
    Tx
    Posts
    934
    Like
    1
    Liked 32 Times in 21 Posts
    Have you checked the voltages on those cylinders? Are you getting enough power to them? Possible grounding issue or a short? Could be the cheapo eBay packs. If it ain't a FoMoCo then I wouldn't run it.

  9. #9
    Word
    Name: Kevin

    Blind's Avatar
    Join Date
    Oct 2009
    Location
    Hella NorCal
    Posts
    2,370
    Like
    127
    Liked 63 Times in 58 Posts
    Quote Originally Posted by mike3704 View Post
    ok but i change all plugs an packs an it still read the same cylinders but the packs are aftermarket
    Move the coil packs to other cylinders and see if the misfire codes follow or stay.

    Generally a misfire will be from a vacuum leak, but a bad coil pack can do it too. What kind of plugs did you install and with what gap?
    2002 DSG HD #09617 NHTOC Truck of the month November 2012
    Ported eaton/plenum/tb, 6lb lower, SCT BA-2600 MAF, OBX longtubes, JLP intake, FTVB, L-spec bilsteins, Hotchkis TVS, 22" replicas. Tuned by Ray McClelland of FTK

  10. #10
    Registered User
    Name: mike


    Join Date
    Jun 2013
    Location
    hammond
    Posts
    15
    Like
    0
    Liked 0 Times in 0 Posts
    They are gap at 44 an they are motorcraft plugs

  11. #11
    "I WANNA GO FAST"
    Name: Ajay

    AjayBrown's Avatar
    Join Date
    Sep 2011
    Location
    Boerne, Texas
    Posts
    273
    Like
    0
    Liked 0 Times in 0 Posts
    They need to be gapped smaller. And I would recommend a different plug.

    2002 DSG Nicknamed "Haley the Harley Truck"
    2013 TOTM Moderator

  12. #12
    Registered User
    Name: Jake

    Braker85's Avatar
    Join Date
    Oct 2009
    Location
    Tx
    Posts
    934
    Like
    1
    Liked 32 Times in 21 Posts
    Ngk tr6

  13. #13
    "I WANNA GO FAST"
    Name: Ajay

    AjayBrown's Avatar
    Join Date
    Sep 2011
    Location
    Boerne, Texas
    Posts
    273
    Like
    0
    Liked 0 Times in 0 Posts
    Quote Originally Posted by Braker85 View Post
    Ngk tr6
    This is what I run, torqued to 22 ft pounds with no anti seize.

  14. #14
    Registered User
    Name: Hank

    harleyhank's Avatar
    Join Date
    Jul 2008
    Location
    Benton Ar.
    Posts
    1,493
    Like
    220
    Liked 1 Time in 1 Post
    Quote Originally Posted by AjayBrown View Post
    This is what I run, torqued to 22 ft pounds with no anti seize.
    13 ft. lbs. is more like it
    Last edited by harleyhank; 07-26-2013 at 10:04 AM. Reason: sp.

  15. #15
    Word
    Name: Kevin

    Blind's Avatar
    Join Date
    Oct 2009
    Location
    Hella NorCal
    Posts
    2,370
    Like
    127
    Liked 63 Times in 58 Posts

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •