-
Registered User
Name: Phil
Abs light on with codes
hell all,
I have the abs light on with 2 codes. The first code is The right front abs sensor. I changed that one but there is a second code c1185.
The code points to the abs relay module.
Has anyone had experience with this code and how to correct it?
Thanks
-
-
Registered User
Name: Phil
Nobody had their abs light turn on?
-
-
Sport90's #1
Name: Matthew
Info that I was able to find on a other site (not sure how good it will be, but its better then nothing):
Code C1185 is related to an internal relay that is inside the ABS module, if you locate the ABS module should be beneth the air filter housing there should be a 2 wire black connector plugging into the module, wire colors of the connector should be Light Green/ Yellow tracer, and Orange/ yellow tracer, disconnect this connector and measure voltage between the Orange/yellow tracer wire and ground, this is a hot at all times wire so there should be above 10 volts at this wire with the key off. If there is your module is probably ****ered... if you don't have above 10V at this wire, check the fuse box under the hood for a 50 amp Maxi fuse that is blown.
-
-
Registered User
Name: Phil
I thought the module failing is when the motor continues to run. I have come across a mosfet chip the is replaced that seems to solve the problem. I did not want to go in for surgery yet since the light turn on when I hit the brakes , and sometimes it does not even turn on.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules