Hey guys,
I recently put a BDS 6" lift on my 2007 AWD and I am getting a strange "humming" / "blender" sound from the font left that gets increasingly louder with increasing speed. This did not happen before i put the lift on when I only had a 3" lift/leveling kit (bad idea by the way!). I checked the entire front end and did not find anything to be loose or have excessive movement. I thought it was the bearing but after replacing that, the problem still exists. I also replaced the brakes, rotors, and front left caliper when I was lifting it but i don't see how that could cause the problem. I do not feel any abnormal vibration while driving and do not hear the noise when spinning the tire by hand when it is jacked off the ground.

Any help would be greatly appreciated.