I took your instructions above with the HD image then combined it with step 2 below to get my splash screen.
Step 2 – Enter the Opening Image Change screen
Insert the USB drive into the DDX9’s USB input and then press and hold the “VOL -” and “MENU”
buttons simultaneously and then press the Reset button (you will need a small object or use a pen to push this). Let go of the Reset button, but continue to
hold the “VOL-” and “MENU” buttons until the screen turns on and the “Custom Mode: Opening
and Wallpaper” screen appears.
Here is what the final output looks like:
Here's another splash screen...
Last edited by Merlin; 07-14-2017 at 01:32 PM.
I just got around to changing mine.
Last edited by Merlin; 07-14-2017 at 01:32 PM.
You can still use google maps on this head unit and put the map on the screen right?
It works using the APPs mode
It works with android auto
On my long list of stuff to do. My current Pioneer double din old
Slowbra, Here's a couple of Head Unit (HU) screen pics per your request.
Both the GPS antenna extension and the Sirius/XM antenna are in the dash.
The panel above the glove box on the top of the dash (it's empty) comes up.
Notice the wire coming out of the ashtray lid. I can fold it under the ashtray lid and close the drawer.
Apple CarPlay - Press a couple of buttons on the HU to change from HDMI to CarPlay. Maps works from HU
Streaming HBO - HDMI is a feed. There is no control of the HBO app from the HU only the iPhone
Waze - Pic of Waze running on the HU
Last edited by Merlin; 07-14-2017 at 01:33 PM.
Just a side note...to finish off the install I used a Metra Part # 95-5818 Ford truck Multi-Kit F-150
This gave a very close to factory look and caused the Head Unit to sit a bit higher and straighter.
NOTE: The top area behind the vent cover where the HU sits needed to be trimmed a bit for fitment.
The Cup Holder is a Belkin Cup Holder Phone Mount - Black (F8J168bt)
Is the face detachable?
Mods=L&S Oil Sep, Blackwood trim & mirror caps, Navi ant' base, E-brake pedal, CAI, C&L Intake & Plenum, 95mm MAF tube, SBTB, 170 T-Stat, Predator+RWTD custom tune, 8# lower, PG Ti900.7 amp, JLA XR570-CXi & Stealthbox, FTVB, Finned Trans Pan, Line of Fire LED, J-Jent Grille, RotorPro Dimpled & Slotted rotors, LED taillights, chrome door strikes, billet locks & coat hangers, ChickenEars Engine Billet package #1&2+door sills, Metco billet aux idler bracket & pulleys, LFP E-Fan, Xenarc HID heads, clear corners, Roush HID fogs, Bedrug, L' 3rd, Kenwood DDX-7017 DVD+TV+Sirrius+RevCam, Lotek dual pillar pod with AutoMeter boost gauge & DynoJet WBC, fog switch mod, UPR billet window switches and door locks, FAST overlays, LFP 58" bars, Hotchkis TVS, Bilsteins, DblG Panhard, Cervinis Cobra R hood, BFG T/A KDW 2 tires, Hawk Ceramic pads, MGP caliper covers.
I had one previously before it was stolen. I know pioneer had double dins with detachable faces