-
Registered User
Name: phil
2008 ford f150
my 2008 Harley all wheel drive truck factory battery died . went and bought a new interstate. problem solved. now my ABS light is on and my4 wheel drive light flashes on and off.. anyone ever had this issue. what do I do???
-
-
Registered User
Name: aaron
You have a fault in the abs system. Pull codes and fix issue or clear and see if it comes back. Probably has nothing to do with the battery replacement.
-
-
Registered User
Name: phil
ok sounds good but how do I clear the codes
-
-
Registered User
Name: aaron
You can try disconnecting the battery but if that doesn't work you will need a scan tool that can read abs codes.
-
-
Registered User
Name: BRIAN
Disconnect battery and drain capacitors in BCM. disconnect positive terminal run jumper wire to negative terminal still attached to battery. leave for 15 min reconnect battery
-
-
'03 Shamu/Build #04441
Name: Sean
If you don't have a scan tool (OBD-II) or a freind that has one, you can also go to your local auto parts store and they can scan and clear the codes for you.
JBA Coffee & Cars 06/12/2016
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules