Interior, Exterior and Engine bay. Sanitized and disinfected. No chemicals.
Only thing that touched the paint was the BOA Towels to dry off the steam.
...and the good news is that it does NOT affect the CQuartz FINEST coating.
Interior, Exterior and Engine bay. Sanitized and disinfected. No chemicals.
Only thing that touched the paint was the BOA Towels to dry off the steam.
...and the good news is that it does NOT affect the CQuartz FINEST coating.
Last edited by Merlin; 07-14-2017 at 06:58 AM. Reason: Photobucket Ransom
That's awesome! Mind me asking what something like that runs? I'd like to do that to all my vehicles.
SLOWBRA (12-18-2016)
Not that you give time for dirt to settle on your engine, but how did the engine cleaning turn out??
Awesome and reasonable. She looks great in the photos (like always). Being a professional detailer yourself, on a scale from 1-10, how would you grade the overall appearance? I'm also curious to how the engine compartment turned out.
I was actually sa little worried (at first). There are lots of thingd in there that don't react to water well (electrics, COPS etc.)
The steam they used was able to get into the nooks and crannies that a typical egngine cleaning could not do.
How did it turn out? Degreased, clean and it started right up no issues.
As far as the "finish" no issues! However, I have Cquartz FINEST coating as a Last Step Product (LSP).
I did check with the Carpro CQuartz folks before I had it steam cleaned and they said it should be fine.
I'm not sure if it would melt away a normal "wax" or affect a sealant (polymer) type products.
Although, that would be easy enough to recoat after the "steam" cleaning was done.
If you look at the second picture (after the steam cleaning) you can see the beading.
I thought it was pretty kewl. No wash mitt, no soap, no blow dry and BOA towels for light drying.
I wish they were in my area, off topic real quick but where did you get that front emblem in the grill?
16 Bar of pressure out of multiple wands, ability to have both dry vapor, or wet vapor and with or without chemical injection.
Pretty much, boss, we have one in our shop here in Pensacola. Fortador, which is powered by a Lambo boiler, looks like the Pro+ Model which honestly that setup is about perfect for exactly this kind of wash.
Merlin, glad to see you dig the Steam Wash! Ive been impressed with the machine.
B.O.B. (12-25-2016)
Slick"Suffer No Fools""USMC 1968-2004"NHTOC #103
02 DSG, Born 6/18/02, Adopted 12/27/02
BG Racing Builder- Ford racing short block,
Trickflow heads, 6# Lower, Magnum Powers Idler Pulley
Hotchkiss suspension, D-MR Hood Mod, D-MR Cannon Performance Exhaust,
Stiffler long bars, JLP street intercooler tank, JLP forced air induction,
KB waiting to be put on.
B.O.B. (12-25-2016)
Hope we don't have to wait 7 years for the answer .
#8022 L&S oil separator, color matched tailgate handle and license plate bulb covers . Fog light mod ,Venom mod , JLP CAI and JLP rear shackles for a 3" drop out back. More to come.......SOLD ...........no more to come.
SonicHD (12-26-2016)