Results 1 to 3 of 3

Thread: induction kit info

  1. #1
    Registered User
    Name: marcus

    maccavvy's Avatar
    Join Date
    Mar 2018
    Location
    Barnsley UK
    Posts
    43
    Like
    8
    Liked 15 Times in 9 Posts

    induction kit info

    Hi guys

    im assuming that to get a better charger noise an induction kit is best.

    whats the best kit and where to go. id think that heatshield is a must

    Marcus

  2. #2
    Word
    Name: Kevin

    Blind's Avatar
    Join Date
    Oct 2009
    Location
    Hella NorCal
    Posts
    2,339
    Like
    98
    Liked 62 Times in 58 Posts
    if you want noise, the biggest difference will be porting the eaton supercharger and filling the 'silencer' holes, and putting a larger pulley for the supercharger belt on the crank. I have a +6psi crank pulley, and a ported eaton on my truck and it screams like crazy. By comparison, the JLP ram air intake doesn't add much noise at all.

    But to answer your question, the JLP ram air intake is the best for these trucks, it's good for a pretty consistent +2psi gain so a lot of extra power and a bit of extra noise.
    2002 DSG HD #09617 NHTOC Truck of the month November 2012
    Ported eaton/plenum/tb, 6lb lower, SCT BA-2600 MAF, OBX longtubes, JLP intake, FTVB, L-spec bilsteins, Hotchkis TVS, 22" replicas. Tuned by Ray McClelland of FTK

  3. #3
    Registered User
    Name: marcus

    maccavvy's Avatar
    Join Date
    Mar 2018
    Location
    Barnsley UK
    Posts
    43
    Like
    8
    Liked 15 Times in 9 Posts
    Thanks for your reply. info is limited over here in the uk

    do you have a link to a pulley off hand. ? does it need mapping after or fit and forget ??
    Last edited by maccavvy; 03-25-2018 at 03:37 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •