I'm trying to print a sheet of business cards, and only the top 4 actually make it in the lines. The rest are too high.
Anyone else have this problem? I guess I'll be making some new ones myself.
I'm trying to print a sheet of business cards, and only the top 4 actually make it in the lines. The rest are too high.
Anyone else have this problem? I guess I'll be making some new ones myself.
they ligned up good for me
Are your printer properties set up to print the format or the cards?Originally posted by Breezi
I'm trying to print a sheet of business cards, and only the top 4 actually make it in the lines. The rest are too high.
Anyone else have this problem? I guess I'll be making some new ones myself.
(i.e. 10 cards or 12 cards per sheet and a 1/2" spacing or something like that)
I have not looked at them since I still have a couple from Dwight, but that is a common issue I have when printing out from different programs.
Later...
Bruce
Printer properties were all right. Still no luck.
I ended up making my own. Same look, the only difference is the text is just a little bit different. So if anyone else is having this problem, PM me your email address and I can send my word doc. to you.
There seems to be a problem when we convert the Word doc to PDF. Everything lines up OK in Word, but shifts in PDF.
We may have a fix for that in a day or two and will then replace the PDFs that are on the server. The reason we do not put the Word doc on-line is to control the card content and look.
Microsoft WYSIWYG strike again!
...Dwight...
I printed out mine tonight and it did take a few sheets to get it
right. Mine did the same thing yours did Breezi. Make sure you have your settings on Preview-8.5 x11, Zoom 100%. Use Page Scaling-Tile large pages. Tile Scale-100%, Overlap-0, Print Range-all. It will work like a charm. Oh and 1 more thing. I used Avery ink jet 27881 card stock for Template 8371. fep
Last edited by fepony; 02-04-2006 at 01:41 AM.
JLP shortblock, Stage 3 heads and cams, 2.3 Whipple w/3" upper and 4# lower.Ba2800, Accufab, Pacesetter LT's, 60#inj, twin 255's, LFP efan, PI 2600 stall, Detroit Locker Tru-Trac, 58" LFP Tbars, Bilsteins all around, D.M.R. panhard, MT DR's. 564/598 on 15# boost