My six-way passenger seat is complete, got a smoking deal on a 01 Navigator track (free). I completely disassembled the track, cleaned, painted and re-lubed. I sprung for a new switch assembly and side shield. Ran power to the seat from an unused position in the Battery Junction Box (BJB), F1.114 with Jcase 30Amp fuse, using 14 gauge SXL wire (approved for high temperature areas such as engine compartments) in corrugated loom (spec for M-2170 and ASTM D4066). I used the open position in the existing connector for the new power circuit and spliced into the 14 gauge existing ground to complete. Finally I updated the owner’s manual fuse directory to reflect the added item.
Reply With Quote