I swear it I did reserched this. I'm just handicap when it comes to wires and fuses. The instructions on the package aren't too clear either, so let me see if what I understood is right.
-The white wire coming out of the gauge goes connected to the light blue and red wire on the dimmer controler.
-The black wire goes to a ground?
Wich is a good ground to use. Please explain if possible I suck @ wiring.
Thanxs.
Just about any good metal ground will do under the dash.
-Del
What he said.Originally Posted by Delmustator
the bracket where the hood pop is located...nice little screw right there to hook ground to..
If you pop the fuse panel cover off by the driver's left knee, there are two screws just below the panel that are good to use.
^^^ That's waht I used. No problems.
Cool thanxs for the advice. So there's no need to tap into the fuse boxe with the white wire like the instructions say right?
Not if you are using the blue and red(orange) wire on the light switch bezel connector in order to use the dimmer. That is the power source.
Great thanxs a lot guys. I'll let you know how it comes out.
Are ya done yet??
Howz it going?
Did you talk to Bob for me?
Posting Permissions
Reply With Quote