Results 1 to 7 of 7

Thread: Stock Airbox Mod-

  1. #1
    Registered User
    Name:


    Join Date
    Feb 2003
    Location
    Cypress, TX
    Posts
    1,272
    Like
    0
    Liked 0 Times in 0 Posts

    Lightbulb Stock Airbox Mod-

    While doing research on the stock airbox mod, I looked at a lot of different ways to mod the box. I have some of them listed below. I decided on a simple plan that would allow a lot of air, without being obvious.
    N2TRUX
    Ayrton
    BAD 2DA BONE
    Since some people want to take this as far as possible, I have a second set of threads that list those that ran fresh air intakes to the bottom of the box-
    Captainoblivious
    Blackhawk

    Of course this would not be complete with out a link to Tim Skeltons site. Here is his page about cold air intakes. This is one of the best user sites I know of, so spend some time looking around-Tim Skelton

    Here's some recent data concerning intake temps. These two threads discuss the difference in intake temps using various types of air intakes-
    Crockett59
    Ken800
    Last edited by N2TRUX; 05-06-2005 at 07:19 PM.

    Click it ^

  2. #2
    Registered User
    Name:


    Join Date
    Feb 2003
    Location
    Cypress, TX
    Posts
    1,272
    Like
    0
    Liked 0 Times in 0 Posts
    I added some updates...TTT

  3. #3
    Registered User
    Name:

    BlairTruck's Avatar
    Join Date
    Dec 2004
    Location
    Edmonton, AB
    Posts
    3,953
    Like
    7
    Liked 111 Times in 76 Posts
    Dont know if there is a newer thread about this, but half of these links dont work

  4. #4
    #4954, 12APR01
    Name:

    kromdom's Avatar
    Join Date
    Sep 2003
    Location
    SoCal
    Posts
    6,126
    Like
    0
    Liked 0 Times in 0 Posts
    Originally posted by BlairTruck
    Dont know if there is a newer thread about this, but half of these links dont work
    Try this one, looks like the MOST worthwhile in terms of real gains:
    http://f150online.com/forums/link.cf...n/cold_air.htm

  5. #5
    Senior Member
    Name: Chris

    Ayrton's Avatar
    Join Date
    Jan 2003
    Location
    Atlanta, Georgia
    Posts
    3,826
    Like
    0
    Liked 0 Times in 0 Posts

  6. #6
    Registered User
    Name:


    Join Date
    Feb 2003
    Location
    Cypress, TX
    Posts
    1,272
    Like
    0
    Liked 0 Times in 0 Posts
    I cleaned up the dead wood....

  7. #7
    Bobby Bouchet's neighbor
    Name:

    l8tapex's Avatar
    Join Date
    Dec 2005
    Location
    Houma,LA
    Posts
    669
    Like
    0
    Liked 0 Times in 0 Posts
    home style..from another.
    Well, heat sheild.
    http://www.nloc.net/forum/showthread...old+air+intake
    Last edited by l8tapex; 12-31-2005 at 10:49 AM.
    MODS:
    MMR 900HP block,Crower Hi-lift Stage II cams,L&M adjustable cam gear,JLP alluminum intake,Accufab TB,JLP Cold Induction,Dekka 60 injectors,twin 255 Fuel pumps,Accel COPs,Reichard Bbower spacer,Kenne Bell 2.3 with Magnum Powers Idler Bracket,Cobra WP,twin row radiator,F250 trans cooler mod,PI torque convertor, Brian's Truck built transmission,Carbon Fiber driveshaft, Bilstiens, slotted rotors, LFP traction bars, Bassani hi flow mids to Magnaflow, SS brake lines, Chickenears Twin Fan , AFCO interchiller, LFP E fan (2nd edition),JLP aluminum intercooler tank,Autometer boost guage, Aeroforce H/D Gauge , Pioneer AVCII , Alpine TV,Alpine speakers,two Bazooka subs,sound matting,stop theif door plates,satillite radio.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •