Another
Another
2003 all black with all options
#8342
2/5 drop by Belltech/Western
Predator/6 lber
http://www.supermotors.org/users/RLP
Last one. This pic was taken @ midnight in May. I thought it makes the pic more interesting.
This one is next to an '03 with 55 series rear tires. I think it looks retarded. The truck sold in 3 days on this used car lot though.
Hope this doesn't mess up the intent of the thread too much.
Here are the Measurements for the Bellteck 3/4 drop
15 3/4 Front
15 1/4 Rear
HB
I have the Ground force 1/3 Kit for harleys and lightnings (Front: coils, shocks. Rear: shackles, hangers, shocks) on now and its at 17" in the rear.
What could I do to get 1"- 1.5" more drop in the back????
I was thinking maybe:
-Belltech or Roush leaf springs
-JLP 4" shackles
2003 Harley 2-Tone
22 inch Verde Replicas, BF Goodrich G-Force rubber, 2/4 Drop, DG Motorsports Roll pan, Hidden Hitch, J&J Lower Grill, Lightning Tails, tonneau cover, Flowmaster exhaust, tinted front wondows, alarm w/ remote start
This is really not the thread for these questions, but depending on how much drop you really have you may need to notch the frame first. Different leafs can help, and so can adjustable hangers, but we really need to know how much drop you have now.
Front 1.5 with stock isolator pad 17" Rear 2.5 17.5" Hotchkis TVS front and rears at time of drop.
IN MEMORY OF
Blake (Fuzion) Finnel 12-3-1986 - 08-11-2007
NHTOC #120
Looking at her from the side .She appear's to sit nicely. Handles like a banshee.
Drop measurements: 16.25 Front / 17.25 Rear
Ruslow 1100 lb coils (no isolator)
Stock upper and lower a-arms
Clunk washers/Cam Bolts
Roush front bumpstops
Trimmed stock rear bumpstops
Energy Suspension front end links
Hotchkis F/R sway bars
QA1 shocks F/R
Ruslow Heim kit on rear shocks
So-Cal rear shock extenders
2" shackles
Leaf spring shims rotated 180
Panhard Bar (awaiting installation)
This is where the Hotchkis kit puts you truck at. I have driven it and its 1000% better! They sell directly. Ask for Drew
What you mean is, "You sell directly".Originally posted by DrewSusp
They sell directly. Ask for Drew
I'm thinking of the Hotchkis TVS, but, I also like the lowered look of sitting on top of the tires. Is there any way of achieving this with purchasing the Hotchkis TVS and getting their performance with a lower stance? >>>>>>>>>>>>>>>>>>>>>>>>>>>>> SORRY!!!!!!!!
Taller tires to fill the gap.
hotchkis TVS...i tried to take the picture so that you could see how much room exists between the tire and wheel well...
as you can see, if you have 22's it would prolly fill up the wheel well a bit more...
NICE!!!!! THANX!!!!!!!!! Almost leveled too.
Here's a new one...Belltech 2" Spindles with Belltech springs= 13.5"
A full 4" lower than stock. Just did it a few minutes ago. It was easy-about 30 minutes per side with no power tools. Now I have to figure out something for tires because mine are touching just sitting there straight.
Recap:
Stock was 17.5" front/20" rear
Shackles was 17.5"/ 18.25" rear
Belltech "3/4" which is front springs with hangers/shackles in back 15.75" front/15.5" rear
Belltech spindles/springs with Western flip kit 13.5" front/13.25" back --almost a 4/7 drop *requires new tires.
Last edited by rlp; 03-30-2006 at 02:34 PM.