would a digital climate control work on an 00-01?
Ide be interested
would a digital climate control work on an 00-01?
Ide be interested
digital wasn't out till 02, so the 00-01's are all manual. I don't see why the 02-03 wouldn't work though, but you'd need the full harness, new bezel, and any other misc crap that goes along with it.
positive it was a 01, and not a 02 with 01 build date?
maybe the lariat had digital and the 01 hd didnt. i have a climate control out of a 02-03 hd that i was going to do but WYA too much work
could have, just didnt seem much sense when the HD is the trim package above the lariat the lariat got the digital climate control and the HD didn't
Well I was wrong remembering the build date, it was 3/30/2001. Here's the pic.
Build Date.jpg
The above picture is just a blown up version of this picture:
Side View.jpg
Last edited by joedpl; 06-26-2009 at 01:48 PM.
I had the same problem like most with the a/c diverting to defrost. I just finished the o ring swap and It solved all my problems!!!!! It feels colder than before and I just saved myself $800.00 that the dealer was going to charge me!!! I took my 03 harley to 2 different auto shops and both gave different diagnosis. I figuire before I spend that kind of money i should try this first, and I'm glad i did.
Thanks
where are the o-rings located. i just took mine out and dissassembled it. also what color vac hose is for "max a/c". i need to get this done. 104 temps are starting to kill me
I know what your talking about, one the lines from my icy res has a leak under the crimp so I have no a/c, luckily today it only got to 86 but I won't be able to get it in the shop till 7/10
I might try fixing my old climate control unit doing the o-ring swap, if that works then I'll have a fully operational spare in case it happens again.
well it works again. i took everything apart and just reassembled it and it works now. hopefully it stays that way
Can someone do a how to on this one? If it is not done by the time I do mine I will post one.
i didnt replace anything because i couldnt find the o-rings. i just reassembeled it and it worked again. i cant complain